Stress Attenuation and Energy Absorption of the Coral Sand with Different Particle Sizes under Impacts
Open Access
- 12 July 2018
- conference paper
- Published by MDPI AG in Proceedings
- Vol. 2 (8) , 545
Abstract
The stress wave attenuation and energy absorption in the coral sand were respectively investigated. A series of experiments were carried out by using a new methodology with an improved split Hopkinson pressure bar (SHPB). Four types of coral sand, i.e., particle sizes of 1.18–0.60 mm, 0.60–0.30 mm, 0.30–0.15 mm, and 0.15–0.075 mm, were carefully sieved and tested. Significant effects of coral sand on stress wave attenuation and energy absorption were observed. Correlation between stress wave attenuation and energy absorption of coral sand was validated. Conclusions on particle size effect of stress wave attenuation and energy absorption, which support each other, were drawn. There existed a common critical stress zone for coral sand with different particle sizes. When the stress below this zone, sand with small particle sizes attenuates stress wave better and absorb energy more; when the stress beyond this zone, sand with larger particle sizes behave better on stress wave attenuation and energy absorption.Keywords
This publication has 5 references indexed in Scilit:
- Comparative study of coral sand and silica sand in creep under general stress statesCanadian Geotechnical Journal, 2017
- Effects of particle size and moisture on the compressive behavior of dense Eglin sand under confinement at high strain ratesInternational Journal of Impact Engineering, 2014
- Effects of grain size and gradation on the dynamic responses of quartz sandsInternational Journal of Impact Engineering, 2013
- Split Hopkinson (Kolsky) Bar2011
- Strain Rate, Creep, and Stress Drop-Creep Experiments on Crushed Coral SandJournal of Geotechnical and Geoenvironmental Engineering, 2009