Experimental Investigation of the Breaking Arc Behavior and Interruption Mechanisms for AC Contactors
Authors:
- 16 December 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 49 (1) , 389-395
Abstract
For alternating current (ac) contactors, the direct consequences of breaking arcs are material erosion and its associated electrical contact failure. In this article, the ac arc of a commercial contactor is simulated experimentally and the relevant arc characteristic parameters are recorded. The effects of contact gap and point-on-wave at break (POW) on arc behavior, including arc voltage, conductance, arc duration, and termination voltage are investigated. In particular, the arc reignition phenomenon at small contact gaps is observed and explained. Finally, two interruption mechanisms of the ac arc (zero-crossing termination and mechanical ruptured termination) are revealed based on the variations in arc termination voltage as a function of POW.Keywords
Funding Information
- National Natural Science Foundation of China (51777039)
This publication has 19 references indexed in Scilit:
- Electromechanical Modeling of a Contactor with AC CoilElectric Power Components and Systems, 2013
- Electric-arc erosion of metal plates of arc suppressors of automatic circuit breakers for extreme commutation currentsRussian Electrical Engineering, 2007
- Numerical analysis of arc plasma behaviour during contact opening process in low-voltage switching deviceJournal of Physics D: Applied Physics, 2007
- New electromagnetic contactorElectric Power Systems Research, 2001
- Modeling contact erosion in three phase vacuum contactorsIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1998
- Arc motion and pressure formation in low voltage switchgearIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1998
- Break arc duration and contact erosion in automotive applicationIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1996
- The effect of contact opening velocity and the moment of contact opening on the AC erosion of Ag/CdO contactsIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1994
- Effect of contact material on the extinction of vacuum arcs under line frequency and high frequency conditionsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1991
- Chopping Current and Quenching Capability of Low-Voltage Vacuum ArcsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1985