Dynamic Load Coefficient of Tyre Forces from Truck Axles
Authors:
- 3 September 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 405-408, 1900-1911
Abstract
This study aims to predict the Dynamic Load Coefficient (DLC) of tyre forces from truck axles. Dynamic Load Coefficient is frequently used to characterise the dynamic loads generated by axles. It is a simple measurement of the dynamic variation magnitude of the axle load, for a specific combination of road roughness and speed. Under normal operating conditions, the DLCs value is typically in the range of 0.05-0.3, and close to zero when the trucks wheels are moving over a perfectly smooth road. To achieve the objectives of this study, which is to determine the DLCs value for seven different types of axles, a simple validated quarter-truck model was excited by a random road surface profile, in order to simulate a vehicle-road interaction. Points are equally spaced along the simulated road to generate dynamic loadings over a broad range of truck speeds. Multiple trucks gross-weight conditions were used to present realistic traffic behaviour. The results showed that irregular road profiles, exciting the vehicle as it travelled, caused continually changing tyre forces. Also, dynamic loading was seen to be fundamentally influenced by the type of suspension (i.e., air and steel), loading condition, and vehicle speed. For example, the DLC value of the tyre forces of the quarter-truck fitted with a steel suspension was found to be more than twice that of the truck fitted with an air suspension. Tyre forces of the one-third laden truck were more aggressive than any other loading condition, due to the uncertain body-bounce generated by the truck, which was strongly dependent on surface irregularities. At low speed, the DLC was greatly decreased if the load was increased. Furthermore, DLC value was always lower for trucks with air suspension over steel suspension, for the same load and vehicle speed. However, air suspension efficiency was clearly better for higher axle loads.Keywords
This publication has 14 references indexed in Scilit:
- Nonstationary Dynamic Pavement Loads Generated by Vehicles Traveling at Varying SpeedJournal of Transportation Engineering, 2007
- Spectral Analysis and Parametric Study of Stochastic Pavement LoadsJournal of Engineering Mechanics, 2002
- Computer simulation and field measurement of dynamic pavement loadingMathematics and Computers in Simulation, 2001
- Alternative methods of traffic characterization in flexible pavement designProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2001
- Calibration of Weigh-in-Motion Systems Through Dynamic Vehicle SimulationJournal of Testing and Evaluation, 1997
- Tires, Suspension and Handling, Second Edition1996
- Truck Suspension Design to Minimize Road DamageProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1996
- Importance of Speed and Frequency in Flexible Pavement ResponseJournal of Engineering Mechanics, 1994
- Dynamic Pavement Loads and Tests of Road-Friendliness for Heavy Vehicle SuspensionsSAE International Journal of Advances and Current Practices in Mobility, 1992
- The description of road surface roughnessJournal of Sound and Vibration, 1973