Flexural Strength Behavior of Composite UHPFC - Existing Concrete
- 1 May 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 701, 32-36
Abstract
Ultra high performance fiber concrete (UHPFC) is an advanced formula concrete that is proven to be more superior than conventional concrete because it embrace the qualities of steel and concrete. Therefore UHPFC properties which include high durability and strength are fully exploited in the research of rehabilitation and strengthening in concrete and even non-concrete structures. This article presents the findings of an experimental study carried out to examine the bonding strength behaviour between normal concrete (NC) substrate and UHPFC as a repair material, under flexural strength test by using third-point loading beam test method. Three types of NC substrate surface preparation were used: as-cast (without surface preparation) as a reference, wire-brushed, and sand-blasted. The flexural test results clearly indicated that all failures occurred through the NC substrate and no de-bonding was observed in the interface between NC substrate and UHPFC. The results of the flexural strength confirmed that adhesion bond strength between NC substrate and UHPFC was stronger than the substrate regardless, the substrate roughness. This proves that UHPFC is able to link and bond strongly with the substrate.Keywords
This publication has 11 references indexed in Scilit:
- Utilization of Ultra-high Performance Fibre Concrete (UHPFC) for Rehabilitation – A ReviewProcedia Engineering, 2013
- Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlayConstruction and Building Materials, 2012
- Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair compositeMaterials and Structures, 2012
- The influence of concrete substrate preparation on overlay bond strengthMagazine of Concrete Research, 2010
- Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)2010
- Concrete Repair, Rehabilitation and Retrofitting II2008
- Strengthening of R/C existing columns with high performance fiber reinforced concrete jacket2008
- Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)2008
- Analysis of Compatibility between Repair Material and Substrate Concrete Using Simple Beam with Third Point LoadingJournal of Materials in Civil Engineering, 2007
- Structural Rehabilitations with Ultra-High Performance Fibre Reinforced Concretes (UHPFRC) / Strukturelle Instandsetzung von Betonbrücken mit Ultra-hochleistungsfähigem Faserfeinkornbeton (UHFB)Restoration of Buildings and Monuments, 2006