Long-term leaching of photovoltaic modules
Authors:
- 5 July 2017
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 56 (8S2) , 08MD02
Abstract
Some photovoltaic module technologies use toxic materials. We report long-term leaching on photovoltaic module pieces of 5 × 5 cm 2 size. The pieces are cut out from modules of the four major commercial photovoltaic technologies: crystalline and amorphous silicon, cadmium telluride as well as from copper indium gallium diselenide. To simulate different environmental conditions, leaching occurs at room temperature in three different water-based solutions with pH 3, 7, and 11. No agitation is performed to simulate more representative field conditions. After 360 days, about 1.4% of lead from crystalline silicon module pieces and 62% of cadmium from cadmium telluride module pieces are leached out in acidic solutions. The leaching depends heavily on the pH and the redox potential of the aqueous solutions and it increases with time. The leaching behavior is predictable by thermodynamic stability considerations. These predictions are in good agreement with the experimental results.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Technologie (0325718)
This publication has 24 references indexed in Scilit:
- Leaching of lead from solder material of waste printed circuit boards (PCBs)Hydrometallurgy, 2012
- Leaching behavior of cadmium from hazardous wasteSeparation and Purification Technology, 2012
- Photovoltaics: Life-cycle analysesSolar Energy, 2011
- The chemistry of the severe acidic precipitation in Shanghai, ChinaAtmospheric Research, 2008
- Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and HerzegovinaEnvironmental Pollution, 2008
- CdTe photovoltaics: Life cycle environmental profile and comparisonsThin Solid Films, 2007
- Life cycle impact analysis of cadmium in CdTe PV productionRenewable and Sustainable Energy Reviews, 2004
- Thin‐film Photovoltaic Cells: Health and Environmental Issues in their Manufacture Use and DisposalProgress in Photovoltaics: Research and Applications, 1995
- Health, safety and environmental aspects of the use of cadmium compounds in thin film PV modulesSolar Energy Materials and Solar Cells, 1994
- Environmental, health and safety issues associated with the manufacture and use of II–VI photovoltaic devicesSolar Cells, 1991