Validation and Refinement of GEDI/ICESat-2 Forest Height Retrievals Assisted by a Priori Continuous CHM Products
Open Access
- 15 June 2026
- journal article
- research article
- Published by MDPI AG in Remote Sensing
- Vol. 18 (12) , 1995
Abstract
Accurate forest height reference points are essential for large-scale forest canopy mapping and carbon stock estimation. Currently, spaceborne Light Detection and Ranging (LiDAR) systems, primarily GEDI and ICESat-2, serve as the main data sources for acquiring global forest height reference points. To ensure data quality, conventional processing often relies on strict physical parameter filtering, such as retaining only nighttime and strong (full power) beam observations, which considerably reduces the available data density. Moreover, gross errors caused by signal attenuation or solar background noise often remain, limiting the accuracy of subsequent spatial modeling. To address the trade-off between measurement accuracy and data density, this study proposes a physically constrained outlier filtering strategy for spaceborne LiDAR retrievals, assisted by a priori continuous canopy height model (CHM) products. Aiming to maximize data retention, this method introduces a morphologically consistent global continuous CHM (such as the 10 m Pauls CHM) as a prior spatial envelope. By calculating the local height difference distribution and applying a 1 adaptive truncation, outliers are effectively removed. Comparative validations in the Genhe (coniferous forest, China) and HARV (mixed broadleaf forest, USA) study areas indicate that: (1) traditional filtering results in a data loss of over 80% while yielding limited accuracy; (2) after relaxing the initial filtering conditions, the proposed strategy reduces the overall root mean square error (RMSE) of GEDI and ICESat-2 retrievals by 12.6% to 36.0%; (3) owing to the effective removal of gross errors, the conventionally discarded daytime and weak (or coverage) beam data achieve substantially reduced error levels, sometimes even lower than those of traditional nighttime strong beam observations. Consequently, the spatial density of high-quality reference points is increased by 1.5 to 4.4 times. This study demonstrates the application value of low signal-to-noise ratio (SNR) spaceborne observations and provides a practical approach for obtaining high-quality, high-density control points for large-scale forest structure mapping.
Keywords
Funding Information
- National Natural Science Foundation of China (42227801)
- National Natural Science Foundation of China (42574048)
- National Key Research and Development Program of China (2022YFB3902605)
- Hunan Provincial Key Research and Development (2025AQ2016)
- State Key Laboratory Special Programs of China Minmetals Corporation (2024GZKJ03)
This publication has 45 references indexed in Scilit:
- ICESat-2 data classification and estimation of terrain height and canopy heightInternational Journal of Applied Earth Observation and Geoinformation, 2023
- Extracting accurate terrain in vegetated areas from ICESat-2 dataInternational Journal of Applied Earth Observation and Geoinformation, 2023
- Review of ICESat and ICESat-2 literature to enhance applications discoveryRemote Sensing Applications: Society and Environment, 2022
- Refraction and coordinate correction with the JONSWAP model for ICESat-2 bathymetryISPRS Journal of Photogrammetry and Remote Sensing, 2022
- High-resolution mapping of forest canopy height using machine learning by coupling ICESat-2 LiDAR with Sentinel-1, Sentinel-2 and Landsat-8 dataInternational Journal of Applied Earth Observation and Geoinformation, 2020
- Slope-adaptive waveform metrics of large footprint lidar for estimation of forest aboveground biomassRemote Sensing of Environment, 2019
- Improved forest height estimation by fusion of simulated GEDI Lidar data and TanDEM-X InSAR dataRemote Sensing of Environment, 2019
- Mapping vegetation heights in China using slope correction ICESat data, SRTM, MODIS-derived and climate dataISPRS Journal of Photogrammetry and Remote Sensing, 2017
- The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2): Science requirements, concept, and implementationRemote Sensing of Environment, 2017
- Combining Tandem-X InSAR and simulated GEDI lidar observations for forest structure mappingRemote Sensing of Environment, 2016