The Rate Performance of Two-Dimensional Material-Based Battery Electrodes May Not Be as Good as Commonly Believed
Open Access
- 6 February 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (3) , 3129-3140
Abstract
Two dimensional materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate-performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as non-2D materials for comparison. For each capacity-rate curve we extract parameters which quantify performance which can then be analyzed using a simple mechanistic model. Contrary to expectations, by comparing a previously proposed figure of merit, we find 2D-based electrodes to be on average ~40 times poorer in terms of rate performance than non-2D materials. This is not due to differences in solid-state diffusion times which were similarly distributed for 2D and non-2D materials. In fact, we found the main difference between 2D and non-2D materials to be that ion mobility within the electrolyte-filled pores of the electrodes to be significantly lower for 2D materials, a situation which we attribute to their high aspect ratios.Keywords
Funding Information
- Science Foundation Ireland (SFI/11/PI/1087, SFI/12/RC/2278)
- H2020 Future and Emerging Technologies (785219)
- Nokia-Bell Labs
This publication has 82 references indexed in Scilit:
- PVP-assisted synthesis of MoS2 nanosheets with improved lithium storage propertiesCrystEngComm, 2013
- Mesoporous NiO nanosheet networks as high performance anodes for Li ion batteriesJournal of Materials Chemistry A, 2013
- A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodesElectrochimica Acta, 2012
- Oxygen Bridges between NiO Nanosheets and Graphene for Improvement of Lithium StorageACS Nano, 2012
- Free-Standing Layer-By-Layer Hybrid Thin Film of Graphene-MnO2 Nanotube as Anode for Lithium Ion BatteriesThe Journal of Physical Chemistry Letters, 2011
- Porous ZnO nanosheets grown on copper substrates as anodes for lithium ion batteriesElectrochimica Acta, 2011
- Nanoflaky MnO2/carbon nanotube nanocomposites as anode materials for lithium-ion batteriesJournal of Materials Chemistry, 2010
- Nano active materials for lithium-ion batteriesNanoscale, 2010
- Determination of the Lithium Ion Diffusion Coefficient in GraphiteJournal of the Electrochemical Society, 1999
- Correlation Between Lithium Intercalation Capacity and Microstructure in Hard CarbonsJournal of the Electrochemical Society, 1996