Crystallization behavior of high‐density polyethylene/linear low‐density polyethylene blend
Authors:
- 5 February 1992
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 44 (4) , 719-726
Abstract
Binary blend of high‐density polyethylene (HDPE) and linear low‐density polyethylene (LLDPE), prepared by melt mixing in an extruder, in the entire range of blending ratio, is studied for crystallization behavior by differential scanning calorimetry (DSC) and X‐ray diffraction measurements. Cocrystallization was evident in the entire range of blend composition, from the single‐peak character in both DSC crystallization exotherms and meltingendotherms and the X‐ray diffraction peaks. A detailed analysis of DSC crystallization exotherms revealed a systematic effect of the addition of LLDPE on nucleation rate and the subsequently developed crystalline morphology, which could be distinguished in the three regions of blending ratio, viz, the “HDPE‐rich blend,” “LLDPE‐rich blend,” and the “middle range from 30–70% LLDPE content.” Variations in crystallinity, crystallite size, and d spacing are discussed in terms of differences in molecular structure of the components.Keywords
This publication has 10 references indexed in Scilit:
- Crystallization, tensile, and impact behavior of polypropylene/polybutadiene blendJournal of Applied Polymer Science, 1991
- Crystallization mechanisms for LLDPE and its fractionsJournal of Polymer Science Part B: Polymer Physics, 1990
- Wide Angle X-ray Line Profile Analysis of Post-neck Drawn Filaments of HDPEInternational Polymer Processing, 1988
- Structure‐property relationships in blends of linear low‐ and conventional low‐density polyethylene as blown filmsPolymer Engineering & Science, 1987
- Effects of mixing on morphology, rheology, and mechanical properties of blends of ultra‐high molecular weight polyethylene with linear low‐density polyethylenePolymer Engineering & Science, 1987
- Characterization and properties of polyethylene blends I. Linear low‐density polyethylene with high‐density polyethyleneJournal of Polymer Science Part B: Polymer Physics, 1987
- Oriented structure formation during polymer film extrusionPolymer Engineering & Science, 1985
- Crystallization of PP in PP/SEBS blends and its correlation with tensile propertiesJournal of Applied Polymer Science, 1984
- The effect of addition of high‐density polyethylene on the crystallization and mechanical properties of polypropylene and glass‐fiber‐reinforced polypropyleneJournal of Applied Polymer Science, 1982
- Plastic deformation of polyethylene. I. Change of morphology during drawing of polyethylene of high densityJournal of Polymer Science Part A-2: Polymer Physics, 1970