Mechanical properties and thermal conductivity of lightweight and high-strength carbon-graphite thermal insulation materials
Authors:
Open Access
- 20 January 2022
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (6) , 4166-4179
Abstract
Thermal insulation composites are widely used in civil and military applications; however, it is difficult to achieve the synergy of multiple technical objectives such as lightweight, thermal insulation, high pressure resistance and high-temperature resistance by adopting traditional preparation techniques. In this study, a novel carbon-graphite thermal insulation material was rapidly prepared by exploiting the micro-thermal press additive manufacturing forming technology, and these multiple objectives were simultaneously achieved by introducing a large number of closed pores. It was found that the percentage of closed pores in the carbon-graphite insulation was increased by increasing the forming density or the amount of thermosetting phenolic resin added, but the thermal conductivity increased in parallel with the compressive strength, while the addition of pre-covered expandable graphite was able to achieve the synergy of high compressive strength and low thermal conductivity. When the content of thermosetting phenolic resin was 25 wt%, forming density was 1.2 g·cm−3, and expandable graphite was clad twice, the prepared carbon-graphite insulation exhibited a closed porosity/porosity ratio, compressive strength, and thermal conductivity of 48.92%, 16.432 MPa, and 0.743 W·m −1 K−1, which has the advantages of lightweight, high compressive strength, heat insulation and high-temperature resistance and has good prospects for industrial applications.Keywords
Funding Information
- Innovative Research Group Project of the National Natural Science Foundation of China (51575313)
- the State Key Laboratory of Material Forming and Mould Technology, Huazhong University of Science and Technology Open Project Research Fund (P2020-003)
This publication has 14 references indexed in Scilit:
- Effect of core-shell microspheres as pore-forming agent on the properties of porous alumina ceramicsMaterials & Design, 2017
- Preparation and characterization of new-type high-temperature vacuum insulation composites with graphite felt core materialMaterials & Design, 2016
- Thermal conductivity of highly porous mullite materialsInternational Journal of Heat and Mass Transfer, 2013
- Experimental investigation on mechanical properties of a fiber-reinforced silica aerogel compositeMaterials Science and Engineering: A, 2011
- Mechanical properties investigation of carbon/carbon composites fabricated by a fast densification processMaterials & Design (1980-2015), 2011
- Carbon–phenolic ablative materials for re-entry space vehicles: Manufacturing and propertiesComposites Part A: Applied Science and Manufacturing, 2010
- Application of a high thermal conductivity C/C composite in a heat-redistribution thermal protection systemCarbon, 2010
- Research progress on thermal protection materials and structures of hypersonic vehiclesApplied Mathematics and Mechanics, 2008
- Strength of cement (final report)Materials and Structures, 1991
- A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase MaterialsJournal of Applied Physics, 1962