14‐bit 20 μW column‐level two‐step ADC for 640 × 512 IRFPA
Authors:
Open Access
- 1 July 2015
- journal article
- circuits and-systems
- Published by Institution of Engineering and Technology (IET) in Electronics Letters
- Vol. 51 (14) , 1054-1056
Abstract
A column‐level two‐step analogue‐to‐digital converter (ADC) structure for infrared focal‐plane array (IRFPA) is proposed. The first step adopts a 16‐column‐shared 6‐bit flash ADC to accomplish the coarse conversion of 16 columns one by one. Owing to the staggered code and correction, a dynamic comparator is adopted in the flash ADC and the power dissipation of a flash ADC averaged to one column in period is only 0.386 μW. The second step is SAR conversion of which the cycle time is prolonged. The input voltage variation of the comparator in the charge redistribution structure is decreased to tens of millivolts; so a 1.8 V power supply is adequate in spite of 5 V V FS . The power dissipation of this comparator is reduced to 5.966 μW. Also, the lower clock frequency of the SAR logic reduces the dynamic power. A 14‐bit two‐step ADC is designed in 0.18 μm process and the equivalent power dissipation of the proposed ADC structure for one column is <20 μW.Keywords
This publication has 3 references indexed in Scilit:
- A LOW POWER HIGH RESOLUTION ROIC DESIGN WITH 14-BIT COLUMN-LEVEL ADC FOR 384 × 288 IRFPAJournal of Circuits, Systems and Computers, 2013
- Digitally Calibrated 768-kS/s 10-b Minimum-Size SAR ADC Array With DitheringIEEE Journal of Solid-State Circuits, 2012
- A Dual-Exposure Single-Capture Wide Dynamic Range CMOS Image Sensor With Columnwise Highly/Lowly Illuminated Pixel DetectionIEEE Transactions on Electron Devices, 2012