Microstructure and texture evolution of medium temperature grain-oriented silicon steel produced by industrialization
Authors:
- 26 August 2019
- journal article
- research article
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 116 (6) , 604
Abstract
The grain-oriented silicon steel was produced by medium temperature reheating and two-stage cold rolling process, and the microstructure and texture of all metallurgical processes were studied. The results shown that the microstructure of the hot rolled strip was inhomogeneous in thickness direction, the surface layer was the recrystallized microstructures with average grain size of 42.29 µm, the center layer was fiber structure, and the Goss texture appeared at surface. The primary recrystallized microstructure with average grain size of 16 µm was obtained after decarburization annealing, which characterized by a strong γ-fiber texture and a weak Goss texture. The average size of inhibitors in hot rolled strip and decarburization annealed sheet were 9.078 and 21.691 nm respectively, they were mainly compound of nitride and sulfide with spherical or lump shapes. The coarse Goss grains with average size 17.57 mm were got after secondary recrystallization, and the magnetic induction B8 and iron loss P1.7/50 were 1.885 T and 1.10 W/Kg, respectively.Keywords
This publication has 25 references indexed in Scilit:
- Metallurgy of high-silicon steel parts produced using Selective Laser MeltingActa Materialia, 2016
- Texture Development in High-Silicon Iron Sheet Produced by Simple Shear DeformationMetallurgical and Materials Transactions A, 2016
- Ordered phases and microhardness of Fe–6.5%Si steel sheet after hot rolling and annealingMaterials Science and Engineering: A, 2016
- Effect of annealing after strip casting on texture development in grain oriented silicon steel produced by twin roll castingMaterials Characterization, 2015
- Fabrication of grain-oriented silicon steel by a novel way: Strip casting processMaterials Letters, 2014
- Effect of asymmetric hot rolling on texture, microstructure and magnetic properties in a non-grain oriented electrical steelJournal of Magnetism and Magnetic Materials, 2014
- Magnetic properties and crystallographic textures of Fe 2.6% Si after 90% cold rolling plus different annealingJournal of Magnetism and Magnetic Materials, 2014
- Overview of Microstructure and Microtexture Development in Grain-oriented Silicon SteelJournal of Magnetism and Magnetic Materials, 2006
- The influence of crystal and sample symmetries on the orientation distribution function of the crystallites in polycrystalline materialsActa Crystallographica Section A, 1981
- Iron and silicon-iron alloysIEEE Transactions on Magnetics, 1971