Numerical Investigation on Cavitation Suppression of Microchannel over a NACA0012 Hydrofoil
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Abstract
To find a better method to suppress cavitation, a microchannel design connecting the internal low‐pressure area with the outside is proposed for the first time in this paper; the method was adopted to replenish fluid in the interior of the low‐pressure area to inhibit cavitation. Through numerical simulation, it is found that the size and position of microchannel have a certain influence on the cavitation inhibition. The results show that the generation and development of cavitation, under the same working conditions, can be effectively restrained by adopting appropriate microchannel (x = 0.05 c, d = 6 cm). Compared with the original hydrofoil, the scale of cavitation is reduced by nearly 50%, and its turbulent kinetic energy remains unchanged. Therefore, it is considered that microchannel technology, as a new means of cavitation suppression, is of great significance to other types of fluid machinery.Keywords
Funding Information
- National Natural Science Foundation of China (51579118)
- Ministry of Industry and Information Technology of the People's Republic of China (360)
- Nantong University (19R86)
This publication has 9 references indexed in Scilit:
- A review on hydrodynamic cavitation disinfection: The current state of knowledgeScience of The Total Environment, 2020
- Simulation investigation on impact damage characteristics of metal plate by cavitating bubble micro-jet water hammerEngineering Failure Analysis, 2020
- Experimental investigation into downstream field of a horizontal axis tidal stream turbine supported by a mono pileApplied Ocean Research, 2020
- Effect of compressibility on bubbly cavitating flowsJournal of Hydrodynamics, 2020
- Computational investigation of cavitating flow around two dimensional NACA 4424 and MHKF-240 hydrofoilVibroengineering PROCEDIA, 2019
- Investigation on the failure analysis of crimped composite insulators used in “V”type stringEngineering Failure Analysis, 2018
- Numerical study of cavitating flow in orifices and its effect on spray characteristicsJournal of Hydrodynamics, 2018
- Numerical analyses of ventilated cavitation over a 2-D NACA0015 hydrofoil using two turbulence modeling methodsJournal of Hydrodynamics, 2018
- AEROFOIL THEORY OF PROPELLER TURBINES AND PROPELLER PUMPS WITH SPECIAL REFERENCE TO THE EFFECTS OF BLADE INTERFERENCE UPON THE LIFT AND THE CAVITATIONJournal of the Society of Mechanical Engineers, 1928