Prediction of Springback and Final Shape in Stamped Automotive Assemblies: Comparison of Finite Element Predictions and Experiments
Authors:
- 9 July 2002
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This work presents a numerical method for predicting the final shape of stamped automotive assemblies. Each assembly was manufactured by laser trimming and spot–welding two separate stampings together. The panels that represented the ‘inner’ of the automotive assembly were stamped from 1.04mm or 1.63mm AA5754 sheet, while panels representing the ‘outer’ were stamped from 0.93mm AA6111 sheet. The finite element method (FEM) was used to predict the final shape of the automotive assemblies. For these predictions, finite element models of the forming, individual panel springback, and final assembly springback operations were performed. The laser trimming and spot–welding processes were modelled using pre–processing software. Experimental validation of the finite element models was undertaken using a coordinate measuring machine (CMM) as well as a non–contact surface digitizing technique. Comparison of the finite element model predictions with the experiments has shown that the influence of the assembly operations such as trimming and spot–welding on final assembly shape can be predicted. These comparisons have also demonstrated the sensitivity of the results to experimental variation.Keywords
This publication has 2 references indexed in Scilit:
- Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modesInternational Journal for Numerical Methods in Engineering, 1992
- Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditionsInternational Journal of Plasticity, 1989