Change in Structure of Ultrahigh Molecular Weight Polyethylene Due to Irradiation in Air and in Nitrogen
- 1 January 2006
- journal article
- research article
- Published by Taylor & Francis in International Journal of Polymer Analysis and Characterization
- Vol. 11 (1) , 71-84
Abstract
The change in the structure and properties of ultrahigh molecular weight polyethylene (UHMWPE) due to gamma irradiation has been studied in air and in a nitrogen atmosphere at different doses up to 400 kGy. Thermal analysis using differential scanning calorimetry (DSC) and swelling were used to monitor changes in crystallinity and cross-linking. New crystallites with different lamellae thicknesses were formed in samples irradiated in air. The samples irradiated in nitrogen did not show new crystallites unless irradiated at more than 200 kGy. Gel percentage and the Charlesby-Pinner equation were used to confirm the increase in cross-linking in the absence of oxygen. Characterization by all the techniques used indicated that irradiation in air causes the production of new crystallites due to oxidation, by which shorter molecular chains are formed and lamellar thickness increases. A lower degree of oxidation and scission occur in nitrogen, as confirmed by scanning electron microscopy (SEM) analysis, which allowed the determination of fracture shape and morphology. Fewer micro-voids and less brittleness were noticed in an oxygen-free environment. To gain more cross-linking, less production of crystalline regions, and more ductility, it is recommended that UHMWPE be irradiated in the absence of oxygen.Keywords
This publication has 22 references indexed in Scilit:
- Fractography evolution in accelerated aging of UHMWPE after gamma irradiation in airBiomaterials, 2004
- Effect of ion implantation on surface energy of ultrahigh molecular weight polyethyleneJournal of Applied Physics, 2003
- Effects of calcium stearate addition of ultrahigh molecular weight polyethylene in direct compression moldingJournal of Applied Polymer Science, 2002
- The effect of cyclic true strain on the morphology, structure, and relaxation behavior of ultra high molecular weight polyethylenePolymer, 2001
- Crystallization Behavior of Ultrahigh Molecular Weight Polyethylene as a Function of in Vacuo γ-IrradiationMacromolecules, 2001
- Compression and tension fatigue resistance of medical grade ultra high molecular weight polyethylene: the effect of morphology, sterilization, aging and temperaturePolymer, 2000
- Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplastyBiomaterials, 1999
- Time resolved simultaneous small- and wide-angle X-ray scattering during polyethylene deformation—II. Cold drawing of linear polyethylenePolymer, 1998
- The effects of gamma radiation sterilization and ageing on the structure and morphology of medical grade ultra high molecular weight polyethylenePolymer, 1996
- Routine crystallinity measurements of polymers by d.s.c.Polymer, 1981