Sustainable Combined Process for Improving Surface Integrity and Fatigue Strength of Heat-Treated 42CrMo4 Steel Shafts and Axles

Authors:
Open Access
Publisher website
Google Scholar
Abstract
The main goal of this study is to develop an optimized sustainable combined process, including sequential dry hard turning and dry smoothing diamond burnishing (DB), to improve the surface integrity (SI) and fatigue limit of heat-treated 42CrMo4 steel shafts and axles. A holistic approach was used based on a two-stage study: (1) optimization of dry hard turning under an average roughness Ra criterion and (2) selection of a suitable dry DB from three alternative DB processes, implemented with burnishing forces of 50, 100, and 150 N. With increasing burnishing force, the average roughness of Ra decreases, the microhardness increases, and the surface axial residual stresses increase in absolute value. However, the fatigue limit decreases, and at burnishing forces of 100 and 150 N, the fatigue limit is smaller than that obtained via the previous turning. The sustainable combined process achieves greater SI than consecutively applied conventional turning and DB under flood lubrication conditions. Dry DB at a force of 50 N increases the rotating bending fatigue limit by 20 MPa and the fatigue life by a factor of more than 70 compared to the previous dry turning.
Funding Information
  • European Regional Development Fund (BG16RFPR002-1.014-0005)

This publication has 40 references indexed in Scilit: