Wideband Fiber Bragg Grating Accelerometer Suitable for Health Monitoring of Electrical Machines
- 23 July 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 20 (24) , 14865-14872
Abstract
A fiber Bragg grating (FBG) accelerometer suitable for health monitoring of electrical machines has been proposed. A polymer composite material is used to design the cantilever of the accelerometer. Thus it is ensured that there are no conducting parts in the accelerometer. Detailed finite element analysis of the cantilever is done to optimize the sensitivity and the resonant frequency. The sensitivity is significantly improved compared to the conventional FBG accelerometer having similar bandwidth of operation. Two different configurations, one having sensitivity 14.4 pm/g with resonant frequency 444 Hz, and the other having sensitivity 7.5 pm/g with resonant frequency 940 Hz have been designed and fabricated. The wide band optical accelerometers will enable monitoring of vibration modes of critical components of electrical machines and more importantly using commercially available standard FBG interrogators, instead of using any complex interrogation techniques. A good match between the simulation and experimental results was observed.Keywords
Funding Information
- CSIR Network Project (ESC0102)
This publication has 20 references indexed in Scilit:
- Note: Strain sensitivity comparison between fiber Bragg gratings inscribed on 125 and 80 micron cladding diameter fibers, case study on the solidification monitoring of a photo-curable resinReview of Scientific Instruments, 2015
- A Fiber Bragg Grating Accelerometer Based on a Hybridization of Cantilever BeamIEEE Sensors Journal, 2014
- Fiber Bragg Grating-Based System for 2-D Analysis of Vibrational Modes of a Steel Propeller BladeJournal of Lightwave Technology, 2014
- Structural Health Monitoring of Civil Infrastructure Using Optical Fiber Sensing Technology: A Comprehensive ReviewThe Scientific World Journal, 2014
- Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivityApplied Optics, 2013
- Design optimization of fiber Bragg grating accelerometer for maximum sensitivitySensors and Actuators A: Physical, 2013
- Optical fiber sensors for static and dynamic health monitoring of civil engineering infrastructures: Abode wall case studyMeasurement, 2012
- Fiber Bragg grating accelerometer with enhanced sensitivitySensors and Actuators A: Physical, 2012
- Tensile Properties and Viscoelastic Model of a Polyimide FilmJournal of Solid Mechanics and Materials Engineering, 2012
- Vibration Detection Using Optical Fiber SensorsJournal of Sensors, 2010