The Effect of Heating Variations on the Mechanical Strength of Hyacinth Fibers
Authors:
Open Access
- 18 December 2023
- conference paper
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 465, 01029
Abstract
Composite properties are determined by the properties of the fiber, matrix, and bonds formed between the fiber and the matrix. Improvement of fiber properties can be done by heat treatment. The effect of heating temperature on the mechanical strength of single water hyacinth fibers is the subject of this study. This study aimed to investigate the effect of heating temperature variations on the mechanical strength of a single water hyacinth fiber. The manufacture of water hyacinth fiber specimens refers to ASTM C1557. The research method used involved heating water hyacinth fibers at various temperatures, namely 60, 80, 100, and 120 0C for 60 minutes each. These fibers are heated in the oven at these temperature variations, and then tested for mechanical strength. The data obtained is used to analyze the effect of heating temperature variations on water hyacinth mechanical fiber strength. The results showed that heating significantly affected the mechanical strength of water hyacinth fibers. The tensile strength of water hyacinth fiber continued to increase at heat treatment up to 1000C and decreased at above heat treatment. This research contributes to the development of better and more sustainable configurations of natural fibers.Keywords
This publication has 27 references indexed in Scilit:
- Effects of heat treatment on the mechanical properties of kenaf fiberAIP Conference Proceedings, 2016
- The diverse applications of water hyacinth with main focus on sustainable energy and production for new era: An overviewRenewable and Sustainable Energy Reviews, 2015
- Effect of Heat Treatment on Properties of Kenaf Fiber Mat/Unsaturated Polyester Composite Produced by Resin Transfer MoldingApplied Mechanics and Materials, 2014
- A review on the tensile properties of natural fiber reinforced polymer compositesComposites Part B: Engineering, 2011
- Effect of Heat Treated Sisal Fiber on Physical Properties of Polypropylene CompositesAdvanced Materials Research, 2010
- Silane coupling agents used for natural fiber/polymer composites: A reviewComposites Part A: Applied Science and Manufacturing, 2010
- Thermal Properties of Composites Made of Heat-treated Wood and PolypropyleneJournal of Composite Materials, 2009
- Pretreatments of natural fibers and their application as reinforcing material in polymer composites—A reviewPolymer Engineering & Science, 2009
- Performance of “Agave lecheguilla” natural fiber in portland cement composites exposed to severe environment conditionsBuilding and Environment, 2007
- Heat settingJournal of Applied Polymer Science, 2001