Energy Distribution in Dowel-Type Joints in Timber Structures When Using Expansive Kits
Open Access
Abstract
This paper provides a study of the mechanical energy distribution in dowel-type joints in timber structures when using expansive kits. The compression caused by the expansive kit increases the friction between the dowel and the timber’s hole, opposing the longitudinal sliding that occurs during the bending of the dowel. The ensuing rope effect increases the load capacity of the joint. The aim was to determine the advantages and disadvantages of using this kind of reinforcement. For this purpose, an ad hoc finite element model of the joint was prepared taking the contact between the different components of the joint into account and appropriately simulating the radial expansion of the dowel and the behavior of the timber. The model was checked for accuracy by comparing the results with those coming from a set of experimental tests. After that, the model was used to verify that the use of the expansive kit reinforcement leads to a slight improvement in the load capacity of the joint. This improvement is related to the frictional forces, whose effect is especially significant at low levels of joint displacement.Keywords
Funding Information
- Development and Technological Innovation of the Ministry of Economy and Competitiveness (Spanish Government) (22.300€)
This publication has 43 references indexed in Scilit:
- Failure mechanisms of dowel-type fastener connections perpendicular to grainEngineering Structures, 2011
- Time-dependent behaviour of expansive concrete-filled steel tubular columnsJournal of Constructional Steel Research, 2011
- Experimental study on multiple-bolt steel-to-timber tension jointsMaterials and Structures, 2004
- Seismic performance of laminated timber frames with fiber‐reinforced jointsEarthquake Engineering & Structural Dynamics, 2004
- Estimation of yield and ultimate strengths of bolted timber joints by nonlinear analysis and yield theoryJournal of Wood Science, 2003
- Elasto-plastic modeling of wood bolted connectionsComputers & Structures, 2003
- High‐performance dowel‐type joints for timber structuresProgress in Structural Engineering and Materials, 2003
- Compressive behaviour of softwood under uniaxial loading at different orientations to the grainMechanics of Materials, 2001
- Nonlinear mechanical behaviour and analysis of wood and fibre materialsComputers & Structures, 1999
- Studies in anisotropic plasticity with reference to the Hill criterionInternational Journal for Numerical Methods in Engineering, 1990