Mode-l Fracture Behaviour of Adhesive Joints. Part II. Stress Analysis and Constraint Parameters
- 1 October 1995
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 53 (3-4) , 163-172
Abstract
The constraint effect on the fracture behaviour of a rubber-modified epoxy was investigated using compact tension (CT) adhesive joints. An elastic-plastic finite element analysis was conducted to evaluate the stress distribution ahead of the crack tip in the bulk adhesive and adhesive joints of different bond thickness. The models with sharp and finite radius crack tips were evaluated in the analyses. The constraint effect of adherends on the stress triaxiality ahead of the crack tip in the adhesive joints were discussed. The constraint parameters were investigated using the J-Q theory and the J-CTOD relationship. It was found that as the adhesive thickness was increased, the stress triaxiality ahead of the crack tip was relieved by the remarkable deformation of the adhesive material. Similarly, the crack tip constraint was reduced with increasing bond thickness so that the fracture energy increased towards the value of the bulk adhesive. A higher constraint was associated with a lower fracture energy and vice versa. Furthermore, the J-integral did not have a unique relationship with the crack-tip opening displacement (CTOD) for different adhesive bond thickness, as this depends on the constraint around the crack tip. The results of this study will help improve reliability assessment of adhesive joints in engineering applications.Keywords
This publication has 19 references indexed in Scilit:
- Fracture behaviour of a rubber-modified tough epoxy systemJournal of Materials Science Letters, 1994
- A comparison of two- and three- dimensional finite element analyses of adhesive jointsInternational Journal of Adhesion and Adhesives, 1993
- Elastic analysis and engineering design formulae for bonded jointsInternational Journal of Adhesion and Adhesives, 1989
- Two Finite Elements for Modeling the Adhesive in Bonded ConfigurationsThe Journal of Adhesion, 1989
- Effect of bond thickness on fracture and fatigue strength of adhesively bonded composite jointsInternational Journal of Adhesion and Adhesives, 1989
- Factors Influencing Elastic Stresses in Double Cantilever Beam Specimens1988
- On the correlation between the mode I failure of adhesive joints and laminated compositesEngineering Fracture Mechanics, 1986
- Failure Behavior of Rubber-Toughened Epoxies in Bulk, Adhesive, and Composite Geometries1984
- An analysis of the crack tip stress field in DCB adhesive fracture specimensInternational Journal of Fracture, 1978
- The role of the adhesive layer in a double cantilever jointInternational Journal of Solids and Structures, 1977