Evaluation of the Multipath Environment Using Electromagnetic-Absorbing Materials at Continuous GNSS Stations
Open Access
Abstract
To date, no universal modelling technique is available to mitigate the effect of site-specific multipaths in high-precision global navigation satellite system (GNSS) data processing. Multipaths affect both carrier-phase and code/pseudorange measurements, and the errors can propagate and cause position biases. This paper presents the use of an Eccosorb AN-W-79 microwave-absorbing material mounted around a GNSS antenna that reflects less than dB of normal incident energy above a frequency of 600 MHz. To verify the feasibility and effectiveness of the Eccosorb, we installed two close stations by continuously operating multi-GNSS (BeiDou, GLONASS, Galileo and GPS) in a challenging location. One station is equipped with the Eccosorb AN-W-79, covering a square area of 3.35 m around the antenna, and the second station operates without it. The standard deviation reductions from single point positioning estimates are significant for all the individual GNSS solutions for the station equipped with microwave-absorbing material. The reductions are as follows: for GPS, between 15% and ; for Galileo, between 22% and ; for GLONASS, ; and for BeiDou, . Furthermore, we assess the influence of multipaths by analysing the linear combinations of code and carrier phase measurements for various GNSS frequencies. The Galileo code multipath shows a reduction of more than for the station with microwave-absorbing material. For GLONASS, particularly for the GLOM3X and GLOM1P code multipath combinations, the reduction reaches , depending on the observation code types. For BeiDou, the reduction is more than , and for GPS, it reaches between and . The Eccosorb AN-W-79 microwave-absorbing material shows convincing results in reducing the code multipath noise level. Again, using microwave-absorbing material leads to an improvement between and in carrier phase cycle slips. The carrier-phase multipath contents on the post-fit residuals from the processed GNSS solutions show a relative RMS reduction of for Galileo and for GLONASS and GPS when using the microwave-absorbing material. This study also presents power spectral contents from residual signal-to-noise ratio time series using Morlet wavelet transformation. The power spectra from the antenna with the Eccosorb AN-W-79 have the smallest magnitude, demonstrating the capacity of microwave-absorbing materials to lessen the multipath influence while not eliminating it.
Keywords
Funding Information
- Fonds National de la Recherche Luxembourg (O18/12909050/VAPOUR/)
This publication has 47 references indexed in Scilit:
- Isolating the multipath component in GNSS signal‐to‐noise data and locating reflecting objectsRadio Science, 2011
- Rectification of the Bias in the Wavelet Power SpectrumJournal of Atmospheric and Oceanic Technology, 2007
- Mapping the GPS multipath environment using the signal‐to‐noise ratio (SNR)Radio Science, 2007
- Modelling the global ocean tides: modern insights from FES2004Ocean Dynamics, 2006
- Finding the repeat times of the GPS constellationGPS Solutions, 2006
- Modified sidereal filtering: Implications for high‐rate GPS positioningGeophysical Research Letters, 2004
- Slip distribution of the 2003 Boumerdes‐Zemmouri earthquake, Algeria, from teleseismic, GPS, and coastal uplift dataGeophysical Research Letters, 2004
- Geodesy using the Swedish permanent GPS network: Effects of signal scattering on estimates of relative site positionsJournal of Geophysical Research, 1996
- Geodesy using the Global Positioning System: The effects of signal scattering on estimates of site positionJournal of Geophysical Research, 1995
- WAVELET TRANSFORMS AND THEIR APPLICATIONS TO TURBULENCEAnnual Review of Fluid Mechanics, 1992