Hydrodynamics and Mixer‐Induced Bubble Formation in Micro Bubble Columns with Single and Multiple‐Channels
- 31 August 2006
- journal article
- review article
- Published by Wiley in Chemical Engineering & Technology
- Vol. 29 (9) , 1015-1026
Abstract
A hydrodynamic characterization of an industrially used gas‐liquid contacting microchannel device is discussed, viz. the micro bubble column of IMM. Furthermore, similar characterization of a gas‐liquid flow microchip of TU/e, with two tailored mixer designs, is used to solve fundamental issues on hydrodynamics, and therefore, to achieve further design and operating optimization of that chip and the IMM device. Flow pattern maps are presented in a dimensionless fashion for further predictions on new fluidic systems for optimum single‐channel multiphase operation. Bubble formation was investigated in the two types of mixers and pinch‐off and hydrodynamic decay mechanisms are observed. The impact of these mechanisms on bubble size, bubble size distributions, and on the corresponding flow patterns, i.e., the type of mixer design, can be decisive for the flow pattern map and thus, may be used to alter flow pattern maps. The bubble sizes and their distribution were improved for the tailored designs, i.e., smaller and more regular bubbles were generated. Finally, the impact of multi‐channel distribution for gas and liquid flow is demonstrated. Intermediate flow patterns such as slug‐annular flow, also found for single‐phase operation, and the simultaneous coexistence of flow regimes are presented, with the latter providing evidence of flow maldistribution.Keywords
This publication has 21 references indexed in Scilit:
- Gas−Liquid and Gas−Liquid−Solid Microstructured Reactors: Contacting Principles and ApplicationsIndustrial & Engineering Chemistry Research, 2005
- Bubble dispenser in microfluidic devicesPhysical Review E, 2005
- Sample Pulse Broadening in Taylor Flow Microchannels for Screening ApplicationsChemical Engineering & Technology, 2005
- Micromixing of Miscible Liquids in Segmented Gas−Liquid FlowLangmuir, 2005
- A model for predicting axial mixing during gas–liquid Taylor flow in microchannels at low Bodenstein numbersChemical Engineering Journal, 2004
- CFD simulations of mass transfer from Taylor bubbles rising in circular capillariesChemical Engineering Science, 2004
- Chemical Micro Process Engineering2004
- Radial mass-transfer enhancement in bubble-train flowInternational Journal of Heat and Mass Transfer, 2003
- Gas‐liquid mass transfer in taylor flow through a capillaryThe Canadian Journal of Chemical Engineering, 1992
- Mass transfer and liquid-phase reactions in a segmented two-phase flow monolithic catalyst reactorChemical Engineering Science, 1988