Morphology, thermal and mechanical performance of epoxy/polysulfone composites improved by curing with two different aromatic diamines
- 26 March 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (41)
Abstract
Epoxy/polysufone (PSF) composites cured with 4,4'‐diaminodiphenyl sulfone (DDS) and 4,4'‐diaminodiphenyl methane (DDM) were fabricated, and the effect of dual curing reaction of diamines with epoxy on morphology, mechanical, and thermal performance was investigated. DSC results indicated that DDM was more reactive than DDS and the activation energy decreased with the rising of DDM content. Structures with small domain size at the early stage of phase separation were fixed by the fast epoxy‐DDM reaction. When the DDM content was elevated to a high level, large dual structures were changed to fine bicontinuous structures, which was favorable to improve the mechanical property. The mechanical performance of epoxy composites was enhanced and the maximum values were achieved when the DDM/DDS ratio was located at 75/25 (PSF/DDS0.25‐DDM0.75). The flexural and tensile strength relative to epoxy/DDM system were enhanced more than those relative to epoxy/DDS, while the increase in toughness was the opposite. TGA measurement showed that thermal stability of epoxy/PSF composites was improved because of the restricting effect of continuous PSF domains on thermal motion of epoxy. DMA analysis exhibited two relaxation peaks for PSF/DDS0.25‐DDM0.75, which could be attributed to the formation of phase separated morphology and epoxy network with different cross‐link density.Keywords
Funding Information
- Natural Science Foundation of Zhejiang Province (LZ14C160002, LY18C160001)
This publication has 45 references indexed in Scilit:
- Dynamically Asymmetric Phase Separation and Morphological Structure Formation in the Epoxy/Polysulfone BlendsMacromolecules, 2011
- Thermoplastic‐modified epoxy resins cured with different functionalities amine mixtures: Morphology, thermal behavior, and mechanical propertiesJournal of Applied Polymer Science, 2009
- Reaction‐induced Phase Separation in a Polysulfone‐modified Epoxy‐anhydride ThermosetJournal of Macromolecular Science, Part B, 2007
- Effect of type of substitution in 4,4′‐bis‐(diaminodiphenyl) methane hardener on cure kinetics, mechanical, and flame retardant properties of tetrafunctional epoxy resinsJournal of Applied Polymer Science, 2006
- Acrylate‐based liquid rubber as impact modifier for epoxy resinJournal of Applied Polymer Science, 2001
- Kinetic studies of an epoxy cure reaction by isothermal DSC analysisThermochimica Acta, 2000
- Processing of Poly(2,6-dimethyl-1,4-phenylene ether) with Epoxy Resin. 2. Gelation MechanismMacromolecules, 1999
- On polyetherimide modified bismaleimide resins, 1. Effect of the chemical backbone of polyetherimideMacromolecular Chemistry and Physics, 1999
- Reaction-induced phase separation mechanisms in modified thermosetsPolymer, 1998
- Effect of curing agent on the phase behaviour of epoxy resin/phenoxy blendsPolymer, 1995