Influence of Adhesive in FSW: Investigation on Fatigue Behavior of Welded, Weld-Bonded, and Adhesive-Bonded Joints in Aluminum AA 6082 T6
Open Access
Abstract
Friction stir welding (FSW) is a solid-state technique, which has assumed an increasingly important role in automotive, naval, and aeronautical industry over the years. Nowadays, thanks to its several benefits, FSW is used to weld any type of metallic, polymeric, or composite material. In recent decades, adhesive bonding has also enhanced relevance due to a request for much lighter structures to increase performance without increasing fuel consumption. From a mechanical perspective, welding has a high tensile strength despite a low fatigue resistance through the lack of joint elasticity. Therefore, the aim of this study is to investigate and compare static and dynamic behavior of welded, weld-bonded, and adhesive-bonded joints. After choosing the most suitable adhesive, surface preparation, consisting of sandblasting, was carried out. First of all, on the basis of previous experience in FSW, the process parameters of hybrid welding were determined. Both quasi-static and dynamic behavior of welded, adhesive-bonded, and weld-bonded joints, made in overlapped configuration, were then compared. Experimental tests showed that the adhesive limits the negative effect, due to the presence of the structural notch of FSW overlapped joints.Keywords
This publication has 26 references indexed in Scilit:
- Influence of elevated temperatures on epoxy adhesive used in CFRP strengthening systems for civil engineering applicationsInternational Journal of Adhesion and Adhesives, 2019
- Experimental investigation and numerical prediction of static strength and fracture behaviour of notched epoxy-based structural adhesivesInternational Journal of Adhesion and Adhesives, 2019
- Creep behaviour of steel bonded joints under hygrothermal conditionsInternational Journal of Adhesion and Adhesives, 2019
- Friction stir weld-bonding defect inspection using phased array ultrasonic testingThe International Journal of Advanced Manufacturing Technology, 2017
- Dissimilar friction stir lap welding of AA 5754-H22/AA 6082-T6 aluminium alloys: Influence of material properties and tool geometry on weld strengthMaterials & Design, 2015
- Fatigue Behaviour of Aluminium Lap Joints Produced by Laser Beam and Friction Stir WeldingProcedia Engineering, 2014
- Weldbonding – A Hybrid Method of AssemblyMetal Finishing, 2013
- Microstructure and mechanical properties of weld-bonded and resistance spot welded magnesium-to-steel dissimilar jointsMaterials Science and Engineering: A, 2012
- Experimental analysis and comparison of the strength of simple and hybrid structural jointsInternational Journal of Adhesion and Adhesives, 2010
- Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatmentJournal of Materials Science, 2004