Shale Stability Evaluation and Leakage Control of High Density Clay Free Brine Drilling Fluid
Authors:
- 2 September 2020
- journal article
- research article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 861, 395-400
Abstract
In view of the particularity of deep-water thick rock reservoir, in order to deal with the problem of poor reservoir stability and serious loss of drilling fluid in the drilling fluid design of M oilfield, this paper has carried out the reservoir inhibitor optimization evaluation test for the salt resistant high-density drilling fluid which has been designed and optimized, and also carried out the appropriate selection of plugging materials and plugging effect test for the loss of salt gypsum layer. The results show that the stability of saturated salt water drilling fluid in the salt gypsum layer with shale can be effectively ensured by the combination of CPI and uhib inhibitors within 2%. At the same time, FloSeal, a new plugging agent for 1-2mm fractures, is selected, and its plugging loss capacity is stably controlled below 30ml.Keywords
This publication has 3 references indexed in Scilit:
- Influence of the corrosion of saturated saltwater drilling fluid on the tribological behavior of HVOF WC-10Co4Cr coatingsEngineering Failure Analysis, 2017
- Hydrophobic silica nanoparticle-stabilized invert emulsion as drilling fluid for deep drillingPetroleum Science, 2016
- Assessing drilling mud and technical fluid contamination in rock core and brine samples intended for microbiological monitoring at the CO2 storage site in Ketzin using fluorescent dye tracersInternational Journal of Greenhouse Gas Control, 2010