Improvement of Mechanical Properties of Coir Fiber (Cocus nucifera) with 2-Hydroxyethyl Methacrylate (HEMA) by Photocuring

Authors:
  • MKMubarak A. Khan
    Mubarak A. Khan
  • MSM. S. Siraj
    M. S. Siraj
  • MRM. Mizanur Rahman
    M. Mizanur Rahman
  • LDLaurence T. Drzal
    Laurence T. Drzal

Abstract
Coir fiber was cured under, ultraviolet radiation with 2-hydroxyethyl methacrylate (HEMA) in order to improve the mechanical properties with reduced water absorption character. A series of solutions of different HEMA concentrations in methanol, along with photoinitiator Irgacure 907, were prepared. The radiation dose, monomer (HEMA) concentration and soaking time were optimized with the extent of grafting of monomer and mechanical properties of cured fiber. five percent HEMA, 10-min soaking time, and a seventh pass of radiation produced the higher tensile strength (65%) and elongation at break (250%) than those of virgin fiber, as well as the highest grafting value (4.4%). For further improvement of the mechanical properties, the fibers were treated with alkali (Potassium Hydroxide) solution of various concentrations for one hour before curing. A 10% alkali-treated fiber showed the increased properties such as grafting (5.3%), tensile strength (95%), and elongation at break (320%) over raw fiber. The effe...

This publication has 8 references indexed in Scilit: