Analysis of Friction Torque Characteristics of a Novel Ball–Roller Composite Turntable Bearing
Open Access
Abstract
Traditional three-row roller YRT turntable bearings exhibit high friction torque during operation, which limits their performance in high-precision and high-response applications. To address this issue, a novel ball–roller composite turntable bearing is proposed that effectively reduces friction torque while maintaining a high load capacity. A mechanical model based on statics is established, and the Newton–Raphson method is employed to calculate the contact load. The formation mechanism of friction torque is analyzed, and a corresponding computational model is developed and validated using experimental data. The effects of axial load, eccentricity, overturning moment, rotational speed, and axial clearance on friction torque are systematically studied. Results indicate that friction torque increases with these parameters. Axial clearance has a significant influence, and an optimal clearance value between the balls and rollers is determined. Additionally, a reasonable range for the raceway curvature radius coefficient is proposed. When the numerical ratio of balls to rollers is 1, the bearing exhibits optimal friction performance. Among various roller crowning strategies, logarithmic crowning yields the best results. This study provides a theoretical basis and technical support for the optimized design of ball–roller composite turntable bearings.Keywords
Funding Information
- National Natural Science Foundation of China (52105182, 2023ZXJ04A02, 252102220018)
- “Key Research and Development Program” of Heilongjiang Province under the “Jiebang Guai-shuai” Science and Technology Tackling Project (52105182, 2023ZXJ04A02, 252102220018)
- Henan Province science technology research project (52105182, 2023ZXJ04A02, 252102220018)
This publication has 14 references indexed in Scilit:
- Friction moment calculation method for tapered roller bearings under combined loadsScience China Technological Sciences, 2024
- Test and analysis of friction torque of double-row angular contact ball bearing under vacuum environmentIndustrial Lubrication and Tribology, 2024
- Mechanical model and contact properties of double row slewing ball bearing for wind turbineREVIEWS ON ADVANCED MATERIALS SCIENCE, 2021
- Analysis of the influence of raceway structure on contact characteristics of turntable bearingJournal of Physics: Conference Series, 2021
- Friction torque in rolling bearings lubricated with axle gear oilsTribology International, 2018
- Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformationsInternational Journal of Mechanical Sciences, 2013
- Friction torque of thrust ball bearings lubricated with wind turbine gear oilsTribology International, 2013
- Load distribution in a four contact-point slewing bearingMechanism and Machine Theory, 2003
- Carrying angle and carrying capacity of a large single row ball bearing as a function of geometry parameters of the rolling contact and the supporting structure stiffnessMechanism and Machine Theory, 2001
- Comparisons of contact pressures of crowned rollersProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2000