Tilt Angle Detection Based on Edge-Core Parallel Gratings Fabricated by Femtosecond Laser Point-by-Point Method
- 12 May 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
Abstract
A compact directional tilt sensor based on edge-core parallel gratings (ECPGs) is demonstrated. By using the femtoseconds laser point-by-point (PbP) writing method, the ECPGs are inscribed near the core-cladding boundary of a single-mode fiber to enhance its grating reflectivity’s sensitivity to fiber curvature. The grating sensor is incorporated into a hinge-like mechanical structure to translate the tilt angle into fiber curvature, enabling tilt angle detection based on changes in the reflection spectrum intensity. An effective signal demodulation approach based on the intensity difference between the reflections from the two ECPGs (ΔIA–ΔIB) is employed to mitigate the influence of fiber bending loss, producing a monotonic signal response with tilt angle. The signal indicator ΔIA–ΔIB demonstrates a linear sensitivity of 0.148 dB/° with an R² value of 0.997 within a tilt angle range of ±80°. The characterization test indicates low temperature sensitivity (~4×10-4 dB/°C), high consistency, and excellent durability, as demonstrated by its robust performance during cyclic tilt measurements (MAE = 0.045°). These characteristics highlight the significant potential of this sensor for various applications.Keywords
Funding Information
- Ministry of Science, Technology and Innovation (MOSTI), Malaysia, through the Technology Development Fund 1 (TDF06221580, MOSTI003-2023TED1)
- University Malaya Research University (RU001-2025B)
- National Natural Science Foundation of China (62305269)
This publication has 28 references indexed in Scilit:
- A fiber Bragg grating-based inclinometer probe with enhanced sensitivity for a higher slope profiling resolutionSensors and Actuators A: Physical, 2023
- Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGsOptical and Quantum Electronics, 2023
- In-place fiber-optic inclinometer based on a vertical cantilever beam and dual FBGsOptics & Laser Technology, 2022
- Optical Fiber Sensors: Working Principle, Applications, and LimitationsAdvanced Photonics Research, 2022
- Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approachSensors and Actuators A: Physical, 2021
- Experimental study on a new FBG-based and Terfenol-D inclinometer for slope displacement monitoringMeasurement, 2020
- A fiber Bragg grating tilt sensor for posture monitoring of hydraulic supports in coal mine working faceMeasurement, 2019
- A liquid pendulum based optical tilt sensorSensors and Actuators A: Physical, 2019
- A new deflection solution and application of a fiber Bragg grating-based inclinometer for monitoring internal displacements in slopesMeasurement Science and Technology, 2018
- Fiber Bragg grating technology fundamentals and overviewJournal of Lightwave Technology, 1997