External contacts formation for thin-film III–V solar cells exploiting inkjet printing
Open Access
- 14 July 2025
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Abstract
The development of advanced thin-film III–V solar cells requires deploying electrical contacting technology to avoid performance degradation associated with the use of standard techniques. Given the thickness of only a few micrometers of such devices, the use of standard wedge wire bonding causes mechanical damage, while manual wire bonding with silver-epoxy contacts leads to electrical losses. To address these limitations, we introduce an approach for the fabrication of external electrical connection based on Inkjet printing processes routinely deployed in printable electronics technology. The method involves a printed polymer isolation layer and e-beam deposition of Au layer connecting the front metal grid to the external contact pad. A proof-of-concept GaAs thin-film solar cell with functional contacts is demonstrated. Notably, the device exhibits good photovoltaic properties and a significant reduction in electrical losses (>7%) compared to contacts fabricated using wire bonding. The method demonstrated an open practical approach for reliable and scalable fabrication of thin-film solar cells exploiting wafer-level epitaxial lift-off processes.Keywords
Funding Information
- European Research Council (ERC AdG AMETIST, #695116)
- Fortums Stiftelse (#20210054)
- Research Council of Finland (Printed Intelligence Infrastructure (PII-FIRI), #358618)
This publication has 14 references indexed in Scilit:
- Solar cell efficiency tables (Version 63)Progress in Photovoltaics: Research and Applications, 2023
- Epitaxial lift-off process for GaAs solar cells controlled by InGaAs internal sacrificial stressor layers and a PMMA surface stressorSolar Energy Materials and Solar Cells, 2022
- Six-junction III–V solar cells with 47.1% conversion efficiency under 143 Suns concentrationNature Energy, 2020
- A substrate removal processing method for III–V solar cells compatible with low-temperature characterizationMaterials Science in Semiconductor Processing, 2017
- Epitaxial lift-off process for gallium arsenide substrate reuse and flexible electronicsNature Communications, 2013
- Graphene as Transparent Electrode Material for Organic ElectronicsAdvanced Materials, 2011
- Roll-to-roll production of 30-inch graphene films for transparent electrodesNature Nanotechnology, 2010
- Analysis of Cu/low-k bond pad delamination by using a novel failure indexMicroelectronics Reliability, 2006
- Multi-junction III–V solar cells: current status and future potentialSolar Energy, 2005
- Epitaxial lift-off GaAs solar cell from a reusable GaAs substrateMaterials Science and Engineering: B, 1997