Characterization of the Oxygen Transmission Rate of New-Ancient Natural Materials for Wine Maturation Containers
Open Access
Abstract
Today, there is a trend in enology promoting a return to the use of old natural materials for the manufacture of storage and maturation wine tanks. One of the most sought-after characteristics of these materials is their permeability to oxygen from the atmosphere to improve wines without this being a harmful process. The reference performance in wine aging is, without doubt, the oak barrel for its ability to oxidize wines in a controlled way, thus improving them. It would be possible to mature wines in containers in which the use of wood is not obligatory, as opposed to aging in oak barrels or foudres. This work presents the results of oxygen permeation analysis under test conditions typical of a tank containing wine, using materials, such as concrete and granite. The oxygen permeability of the materials tested was very diverse, typical of natural materials. The results showed that earthenware presents an excessive permeability, not only to atmospheric oxygen, but also to liquids and needs treatment before being used in liquid containers. Claystone and concrete can be impermeable to liquids, but maintain permeability to atmospheric oxygen—making them candidates for use in permeable tanks for wine maturation. Finally, granite has some very interesting characteristics, though thickness control is required when calculating the desired oxygen transmission rate.Keywords
Funding Information
- Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España (AGL2014-54602P)
- FEDER-TCUE (Concrete-OX and VSOx projects)
- European Agricultural Fund for Rural Development (Glovalmavin project)
This publication has 42 references indexed in Scilit:
- DIN 53380-2:2006-11, Prüfung von Kunststoffen_- Bestimmung der Gasdurchlässigkeit_- Teil_2: Manometrisches Verfahren zur Messung an Kunststoff-Folien2019
- DIN 53380-1:2000-07, Prüfung von Kunststoffen_- Bestimmung der Gasdurchlässigkeit_- Teil_1: Volumetrisches Verfahren zur Messung an Kunststofffolien2019
- DIN 53380-3:1998-07, Prüfung von Kunststoffen_- Bestimmung der Gasdurchlässigkeit_- Teil_3: Sauerstoffspezifisches Trägergas-Verfahren zur Messung an Kunststoff-Folien und Kunststoff-Formteilen2019
- DIN 53380-5:2014-12, Prüfung von Kunststoffen_- Bestimmung der Gasdurchlässigkeit_- Teil_5: Sauerstoffspezifisches optisches Gassammelverfahren zur Messung an Kunststoff-Folien und Kunststoff-Formteilen2019
- Comparison of test methods for oxygen permeability: Optical method versus carrier gas methodPolymer Testing, 2017
- Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting2015
- Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method2015
- Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay2008
- Ambient oxygen ingress rate method—an alternative method to Ox‐Tran for measuring oxygen transmission rate of whole packagesPackaging Technology and Science, 2000
- Permeation of gases and vapours through polymer films and thin sheet—part IPolymer Testing, 1980