Exposure to Sulfuric Acid in Zinc Production
Authors:
Open Access
- 1 March 2004
- journal article
- research article
- Published by Oxford University Press (OUP) in Annals of Occupational Hygiene
- Vol. 48 (2) , 159-170
Abstract
This study characterized workers’ exposure to sulfuric acid in two cell houses of a zinc production plant. We also aimed at estimating previous exposure to sulfuric acid by simulating the process conditions from before 1975 to produce exposure data for an epidemiological study on cancer in this industry. Further, we compared different sampling methods for aerosols in the cell houses. Personal sampling with a 37 mm Millipore cassette showed that the geometric means of the exposure levels for the workers in the two cell houses were 0.07 mg/m3 (range 0.01–0.48 mg/m3) and 0.04 mg/m3 (range 0.01–0.15 mg/m3). Norway’s newly revised limit value of 0.1 mg/m3 was exceeded in 39.0 and 12.9% of the samples in the two cell houses. After the foam layer was removed from the electrolyte surface to simulate the production process from before 1975, the concentration of sulfuric acid increased from 0.11 to 6.04 mg/m3 in stationary measurement by the Millipore sampler. Stationary sampling showed that the Millipore sampler and the inhalable fraction of the Respicon® impactor underestimated the sulfuric acid concentration by factors of 1.5 and 2.1 compared with the Institute of Occupational Medicine (IOM) sampler. Sampling with the Respicon impactor showed that the respirable, tracheobronchial and extrathoracic fractions constituted 3.0, 18.7 and 71.7% of the inhalable sulfuric acid aerosol, respectively. Today’s exposure levels are lower than those reported to be associated with an increased prevalence of laryngeal cancer in other industries, but the levels prior to 1975 seem to have been much higher. By mass, most of the inhalable aerosol was in the size fractions considered to be highly relevant for the effects of sulfuric acid on the respiratory system. The risk of cancer among the cell house workers should be investigated in an epidemiological study.Keywords
This publication has 13 references indexed in Scilit:
- Evaluation of the Respicon ® as a personal inhalable sampler in industrial environmentsJournal of Environmental Monitoring, 2002
- Performance of the RespiCon™ Personal Aerosol Sampler in Forest Products Industry WorkplacesAIHA Journal, 2002
- Field Comparison of 37-mm Closed-Face Cassettes and IOM SamplersApplied Occupational and Environmental Hygiene, 2002
- Personal Sampling in Parallel with Open-Face Filter Cassettes and IOM Samplers for Inhalable Dust - Implications for Occupational Exposure LimitsApplied Occupational and Environmental Hygiene, 2000
- Design and Performance of a New Personal Aerosol MonitorAerosol Science and Technology, 1999
- Air Sampling Methodologies for Sulfuric Acid Mist in Copper Electrowinning: Field Evaluation and Development of a New MethodApplied Occupational and Environmental Hygiene, 1997
- Laryngeal cancer incidence among workers exposed to acid mists (United States)Cancer Causes & Control, 1997
- Immunotoxicity of sulfuric acid aerosol: effects on pulmonary macrophage effector and functional activities critical for maintaining host resistance against infectious diseasesToxicology, 1994
- EXPOSURE TO SULPHURIC ACID AND SULPHUR DIOXIDE IN THE MANUFACTURING OF TITANIUM DIOXIDEAnnals of Occupational Hygiene, 1992
- Aerosol versus solution composition in occupational exposuresScience of The Total Environment, 1985