Open-Circuit Fault Control Techniques for Bearingless Multisector Permanent Magnet Synchronous Machines
- 18 February 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 57 (3) , 2527-2536
Abstract
This paper presents three-phase and single-phase open-circuit fault-tolerant control strategies of radial suspension force and torque generation for bearingless Multi-Sector Surface mounted Permanent Magnet Synchronous Machines. A combined winding topology is installed in the stator so that each phase contributes to both suspension force and motoring torque production. Indeed, a triple sectored three-phase winding is employed. Each three-phase winding is supplied by a power converter to independently control the suspension force vector and torque over each sector. An analytical formulation of the force and torque generation is described considering both Three-Phase Open Circuit and Single-Phase Open Circuit fault conditions. The analytical models of the machine are presented in a generalized matrix form so that they can be applied to any machine with a multi-sector winding structure. The analytical models are then used to derive the control algorithms that allow to control the bearingless machine when a whole three-phase winding or one phase of one or two sectors are open circuited. The theoretical analysis is verified with both Finite Elements Analysis and experiment tests. This system shows a good open circuit fault-tolerant capability.Keywords
This publication has 20 references indexed in Scilit:
- Design of Dual Purpose No-Voltage Combined Windings for Bearingless MotorsIEEE Transactions on Industry Applications, 2017
- uCube: Control platform for power electronics2017
- Radial force control of Multi-Sector Permanent Magnet machines considering radial rotor displacement2017
- Radial force control of multi-sector permanent magnet machines2016
- Stabilized suspension control strategy at failure of a motor section in a d-q axis current control bearingless motor2015
- Fault-Tolerant Control of Five-Phase Permanent-Magnet Motors With Trapezoidal Back EMFIEEE Transactions on Industrial Electronics, 2010
- Mixed Flow Artificial Heart Pump With Axial Self-Bearing MotorIEEE/ASME Transactions on Mechatronics, 2005
- Fault detection and isolation on a PWM inverter by knowledge-based modelIEEE Transactions on Industry Applications, 1998
- A bearingless method for induction machinesIEEE Transactions on Magnetics, 1993
- Radial force in a bearingless reluctance motorIEEE Transactions on Magnetics, 1991