Study on Degradation Law and the Equivalent Thickness Model of Steel Subjected to Sulfate Corrosion
Open Access
Abstract
In order to study the variation of mechanical properties of steel under acid rain corrosion conditions in northern China, monotonic tensile tests were conducted on Q235 steel with a thickness of 3.0 mm and 4.5 mm using a method of artificially prepared simulated acid rain solution for indoor accelerated corrosion. The results show that the failure mode of corroded steel standard tensile coupon includes normal fault and oblique fault. The failure patterns of the test specimen show that the thickness of the steel and corrosion rate affected the corrosion resistance. Larger thicknesses and lower corrosion rates will delay the failure mode of corrosion on steel. The strength reduction factor (Ru), deformability reduction factor (Rd) and energy absorption reduction factor (Re) decrease linearly with the increasing corrosion rate from 0% to 30%. The results are interpreted also from the microstructural point of view. The number, size, and distribution of the pits are random when the steel is subjected to sulfate corrosion. The higher the corrosion rate, the clearer, denser, and more hemispherical the corrosion pits. The microstructure of steel tensile fracture can be divided into intergranular fracture and cleavage fracture. As the corrosion rate increases, the dimples at the tensile fracture gradually disappear and the cleavage surface gradually increases. An equivalent thickness reduction model is proposed based on Faraday’s law and the meso-damage theory.Keywords
Funding Information
- Foundation of Educational Department of Liaoning Provincial (LJKZ1056, 52278165)
- National Natural Science Foundation of China (LJKZ1056, 52278165)
This publication has 29 references indexed in Scilit:
- Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beamsMaterials and Structures, 2012
- Chemical characteristics of rainwater in northeast China, a case study of DalianAtmospheric Research, 2012
- Corrosion Behavior of 35CrMn and Q235 Steel in Simulated Acid Rain ConditionsJournal of Materials Engineering and Performance, 2011
- Analysis and design of concrete-filled stiffened thin-walled steel tubular columns under axial compressionThin-Walled Structures, 2009
- Strength and deformability of corroded steel plates under quasi-static tensile loadJournal of Marine Science and Technology, 2009
- Corrosion of low carbon steel in atmospheric environments of different chloride contentCorrosion Science, 2009
- Consequences of steel corrosion on the ductility properties of reinforcement barConstruction and Building Materials, 2008
- Bond strength prediction for reinforced concrete members with highly corroded reinforcing barsCement and Concrete Composites, 2008
- Bond behaviour of corroded reinforcing steel bars in concreteCement and Concrete Research, 2006
- Probabilistic Model for Marine Corrosion of Steel for Structural Reliability AssessmentJournal of Structural Engineering, 2003