Mechanical and Structural Performance of Bio-Resin Composites Reinforced with Biopolymer Nonwoven Fabrics
Open Access
Abstract
This study investigates the mechanical, structural, and thermal performance of bio-based composite laminates reinforced with nonwoven fibrous materials derived from polylactic acid (PLA), poly(butylene succinate) (PBS), and polyamide 1010 (PA1010). The fibrous reinforcements, produced using melt-blown and electrospinning techniques, were characterized in terms of morphology, fibre diameter distribution, and wettability, and subsequently incorporated into bio-resin laminates to strengthen them. The curing behaviour of the composites was evaluated using differential scanning calorimetry (DSC). The results demonstrate that fibre structure and morphology strongly influence resin impregnation and interfacial interactions. Mechanical properties varied significantly depending on the reinforcement type. PA1010-based laminates exhibited the highest strength and stiffness due to their compact and uniform fibrous structure. PBS-based systems showed intermediate behaviour, while PLA-based composites displayed lower strength but higher deformability. DSC results indicated that fibre type affected crosslinking efficiency. Thermogravimetric analysis (TGA) revealed similar initial thermal stability of laminates (T5% ≈ 299–313 °C), governed by the resin matrix, while differences at higher temperatures reflected the type of reinforcement used. These findings highlight the importance of fibre morphology and interfacial compatibility in designing sustainable composite laminates reinforced with recycled fibrous materials.Keywords
This publication has 57 references indexed in Scilit:
- Fabrication and Evaluation of Electret Melt‐Blown Polypropylene/Polybutylene Succinate Nonwovens for Air Filtration ApplicationPolymer Engineering & Science, 2025
- Mechanical performance of bio‐based fiber reinforced polymer composites: A reviewPolymer Composites, 2025
- A comprehensive review on types and properties of biopolymers as sustainable bio‐based alternatives for packagingFood Biomacromolecules, 2024
- Balancing thermal conductivity, dielectric, and tribological properties in polyamide 1010 with 2D nanomaterialsJournal of Applied Polymer Science, 2024
- Melt processing of biodegradable poly(butylene succinate) (PBS)—a critical reviewClean Technologies and Environmental Policy, 2024
- Facile fabrication of stain‐resistant poly(lactic acid)/silicone powder fibers: Comprehensive structure characterization and performance evaluationJournal of Applied Polymer Science, 2024
- Poly(butylene succinate) and its copolymers: Research, development and industrializationBiotechnology Journal, 2010
- Electrospinning: A Fascinating Method for the Preparation of Ultrathin FibersAngewandte Chemie International Edition, 2007
- Electrospinning of Nanofibers: Reinventing the Wheel?Advanced Materials, 2004
- Epoxy resins-chemistry and technology, 2nd Edition, Clayton A. May, Ed., Marcel Dekker, New York, 1988, 1,288 pp. Price: $195.00Journal of Polymer Science Part C: Polymer Letters, 1988