Analysis of Ignition Spark Parameters Generated by Modern Ignition System in SI Engine Fueled by Ammonia
Open Access
Abstract
This paper analyzes the influence of the number of ignition coils and spark discharge energy on the Coefficient of Variation of Indicated Mean Effective Pressure (COVIMEP) of an SI internal combustion piston engine. A modern electronically controlled induction ignition system is used during the test. Two fuels are used in the experiment. The reference fuel is gasoline and the tested fuel is ammonia. For the traditional fuel, using an additional ignition coil does not improve COVIMEP. This parameter for gasoline has an almost constant value for different ignition system charging times. The situation is different for ammonia. This fuel requires high ignition energy. The use of one ignition coil demands a long charging time. For short charging times, unrepeatability of the engine cycles is unacceptable. The use of an additional ignition coil allowed to the charging coil timing to be shortened and the unrepeatable engine cycles to be reduced. This paper determined the maximum charging time of the used ignition coil, above which the spark parameters are worse. In addition, the influence of charging time and number of ignition coils on total spark energy, spark discharge duration, maximum spark power, and voltage during spark discharge for ammonia is presented. The data presented in this paper are developed based on measurements of current and voltage in the secondary winding of the ignition coil. A self-developed electronic device enabling the change in spark energy is used to control the ignition system. This paper also presents the construction of modern ignition systems, describes the functions of selected components, and briefly discusses their diagnostics.Keywords
This publication has 15 references indexed in Scilit:
- Experimental study on the spark ignition characteristics at elevated temperature and pressure under flow conditionsCombustion and Flame, 2023
- Nanosecond repetitively pulsed discharges and conventional sparks of ammonia-air mixtures in a fan-stirred cruciform burner: Flammability limits and ignition transitionApplications in Energy and Combustion Science, 2023
- Spark discharge energy effect on in-cylinder characteristics performance of rapid compression and expansion machine with spark ignition direct injection strategyFuel, 2022
- Wpływ parametrów napięciowych i prądowych na pracę układu wtrysku wielokrotnego zbudowanego na bazie sterownika Compact RIOPRZEGLĄD ELEKTROTECHNICZNY, 2022
- Measurement of the effect of parasitic capacitance in minimum ignition energy spark generation circuitsJournal of Electrostatics, 2022
- Spark anemometry applied through secondary current measurements in an optical spark ignition engineEnergy Conversion and Management, 2022
- Reconsideration of energy measurement of spark discharge using different triggering methods and inductance loadsJournal of Electrostatics, 2022
- Design of a Daily-User Methodology to Detect Fuel Consumption in Cars with Spark Ignition EngineApplied Engineering Letters : Journal of Engineering and Applied Sciences, 2020
- Quantitative evaluation of the breakdown process of spark discharge for spark-ignition enginesJournal of Physics D: Applied Physics, 2019
- Effects of increased spark discharge energy and enhanced in-cylinder turbulence level on lean limits and cycle-to-cycle variations of combustion for SI engine operationApplied Energy, 2017