Chemical and appearance changes of wood due to artificial weathering – Dose–response model
Authors:
Open Access
- 22 January 2019
- journal article
- conference paper
- Published by SAGE Publications in Journal of Near Infrared Spectroscopy
- Vol. 27 (1) , 26-37
Abstract
The aim of this study was to assess a model for the surface degradation kinetics of natural wood exposed to artificial weathering. The photochemical and physical processes of weathering result in simultaneous changes of both the wood matrix composition (i.e. lignin content, cellulose crystallinity index, cellulose polymerization degree) and wood’s appearance (i.e. colour, gloss, roughness). European larch, a popular cladding material, was used for experimental samples. Weathering was conducted in a QUV artificial weathering machine for 672 h according to the EN927-6 standard. The response of wood was assessed using multi-sensor measurements. Results revealed that changes in colour are evident already after 28 h of artificial weathering, with an increase in a* and b*, and a decrease in L*. That initial trend was reversed afterward, with the colour changing to grey. Due to the particular shape of the curves representing colour coordinates, it is difficult to use CIE L*a*b* parameters to model the weathering dose. However, the degradation curve established for selected near infrared bands was useful to build a dose–response model of wood surface degradation. In all cases, a clear trend of change in absorbance values that progressed along with the weathering dose was observed. These curves, unlike the CIE L*a*b* values, are monotonic, meaning that dose value corresponded with only one value of absorbance. Principal component analysis of the near infrared spectra allowed clustering of the spectra by different dose classes, with the main differentiation in the reference class and in the final class (maximum dose). It was found that the discrimination between spectra at diverse cumulative weathering doses was more evident for earlywood than for latewood. This confirms the hypothesis that degradation kinetics differ depending on the anatomical configuration of wood. This research is a first step for establishing dose–response model for natural weathering, where precise quantification of weathering parameters is more challenging.Keywords
Funding Information
- European Commission, Horizon 2020 (739574)
- Ministero dell'Istruzione, dell'Università e della Ricerca (RBSI14Y7Y4)
This publication has 25 references indexed in Scilit:
- Wood degradation under UV irradiation: A lignin characterizationJournal of Photochemistry and Photobiology B: Biology, 2016
- New alternatives for wood preservation based on thermal and chemical modification of wood— a reviewAnnals of Forest Science, 2015
- Assessment of wood structural members degradation by means of infrared spectroscopy: an overviewStructural Control and Health Monitoring, 2015
- Modelling colour changes of wood for architectural CAD simulationsComputer-Aided Design, 2011
- On the modelling of colour changes of wood surfacesEuropean Journal of Wood and Wood Products, 2009
- Photodegradation and photostabilisation of wood – the state of the artPolymer Degradation and Stability, 2005
- Colour of larch heartwood and relationships to extractives and brown-rot decay resistanceTrees, 2004
- Variation of the viscoelastic properties of wood as a surface finishes substrateWood Science and Technology, 2000
- Studies of the degradation and protection of wood surfacesWood Science and Technology, 1992
- The effect of aging on the ultrastructure of woodWood Science and Technology, 1975