Abstract
Ultrathick battery electrodes are appealing as they reduce the fraction of inactive battery parts such as current collectors and separators. However, thick electrodes are difficult to dry and tend to crack or flake during production. Moreover, the electrochemical performance of thick electrodes is constrained by ion and electron transport as well as fast capacity degradation. Here, we report a thermally induced phase separation (TIPS) process for fabricating thick Li-ion battery electrodes, which incorporates the electrolyte directly in the electrode and alleviates the need to dry the electrode. The proposed TIPS process creates a bicontinuous electrolyte and electrode network with excellent ion and electron transport, respectively, and consequently achieves better rate performance. Using this process, electrodes with areal capacities of more than 30 mAh/cm2 are demonstrated. Capacity retentions of 87% are attained over 500 cycles in full cells with 1-mm-thick anodes and cathodes. Finally, we verified the scalability of the TIPS process by coating thick electrodes continuously on a pilot-scale roll-to-roll coating tool. Significance Increasing the thickness of battery electrodes is an attractive approach to reduce the fraction of battery parts that do not store energy, such as current collectors and separators. However, the fabrication of thick electrodes holds challenges of its own such as cracking or flaking during the electrode production and limitations in ion and electron transport. To address the latter, advanced electrode templating techniques have been suggested, but these techniques are not scalable. In this work, ultrathick electrodes are fabricated on a pilot-scale roll-to-roll tool using a thermally induced phase segregation process. This electrode structuring method creates a bicontinuous electrolyte and electrode network with excellent ion and electron transport reducing the charge-transport challenges in thick electrodes.

This publication has 43 references indexed in Scilit: