Axial Flux and Eddy-Current Loss in Active Region of a Large-Sized Squirrel-Cage Induction Motor
Authors:
- 9 August 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 46 (11) , 3933-3938
Abstract
This paper analyzes the axial flux and the corresponding eddy currents inside the laminated cores of a large-sized squirrel-cage induction motor running under the steady-state operation in order for possible optimum design of large-sized induction motors used in industry. The analysis was based on a complete 3-D numerical model. In the model, the laminated cores were replaced by anisotropic solid bodies, and the eddy currents inside the end portion of the stator frame were modeled with the standard impedance boundary condition. A time-harmonic finite-element analysis based on the magnetic vector potential-electric scalar potential formulation was performed. According to the results, under steady-state no-load, the axial flux, caused mainly by the air-gap fringing flux and the end-winding leakage flux, appears in the end portion of the cores, and decays rapidly toward the middle of the cores. The corresponding planar eddy currents inside the laminations of the stator core are mainly concentrated near the edges of the stator teeth. The eddy-current loss is small, but the distribution of the loss over the laminations is definitely non-uniform.Keywords
This publication has 16 references indexed in Scilit:
- Analysis of Eddy-Current Loss in End Shield and Frame of a Large Induction MachineIEEE Transactions on Magnetics, 2009
- Calculation and Analysis of Stator End-Winding Leakage Inductance of an Induction MachineIEEE Transactions on Magnetics, 2009
- Design of Rotating Electrical Machines2008
- REVIEW AND FUTURE APPLICATION OF FINITE ELEMENT METHODS IN INDUCTION MOTORSElectric Machines & Power Systems, 1998
- A 3-D finite-element computation of eddy currents and losses in laminated iron cores allowing for electric and magnetic anisotropyIEEE Transactions on Magnetics, 1995
- Surface impedance method applied to the prediction of eddy currents in hydrogenerator stator end regionsIEEE Transactions on Magnetics, 1995
- On the use of the magnetic vector potential in the finite-element analysis of three-dimensional eddy currentsIEEE Transactions on Magnetics, 1989
- Electromagnetic design of turbogenerator stator end regionsIEE Proceedings C Generation, Transmission and Distribution, 1989
- A Method to Calculate Turbogenerator End Region Fields and Losses and Validation using Measured ResultsIEEE Transactions on Energy Conversion, 1987
- 3D modelling of a non-linear anisotropic laminationIEEE Transactions on Magnetics, 1985