Isothermal solidification stage during transient liquid-phase bonding single-crystal superalloys
Authors:
- 21 March 2014
- journal article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 94 (11) , 1219-1234
Abstract
In this work, the isothermal solidification stage during transient liquid-phase bonding (TLP) single-crystal superalloys has been investigated. Experiments were performed to ascertain the bonding microstructures and the kinetics during the isothermal solidification. The results have shown that the isothermal solidification stage deviates from the standard parabolic TLP models. Lots of the borides with fine, short bar and acicular morphologies formed in the diffusion affected zone (DAZ) in the thick wall and thin wall substrate specimens at the isothermal solidification stage. Electron probe microanalysis results have shown that there exists B composition peak in the DAZ. Examination of the bonding kinetics presented that there are three stages in the isothermal solidification stage: initial stage, transient stage and final stage with different growth velocity of the isothermal solidification zone (ISZ). And the relationship of the width of the ISZ with the square root of the bonding time didn’t satisfy the parabolic relationship. Based on the microstructures and kinetics observed, a film ISZ mechanism is proposed, and a model is constructed to illustrate the isothermal solidification stage during bonding single-crystal superalloys.Keywords
This publication has 24 references indexed in Scilit:
- Understanding reversed temperature dependence of diffusional solidification time in single crystal superalloy brazementPhilosophical Magazine, 2011
- Variation in diffusion-induced solidification rate of liquated Ni–Cr–B insert during TLP bonding of Waspaloy superalloyMaterials Science and Engineering: A, 2008
- Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni–Si–B filler metalMaterials Science and Engineering: A, 2006
- Effect of bonding temperature on isothermal solidification rate during transient liquid phase bonding of Inconel 738LC superalloyMaterials Science and Engineering: A, 2005
- Strength of joints produced by transient liquid phase bonding in the Cu–Sn systemActa Materialia, 2005
- Interface structure and mechanical performance of TLP bonded joints of Al2O3p/6061Al composites using Cu/Ni composite interlayersScripta Materialia, 2004
- The influence of base metal grain size on isothermal solidification during transient liquid-phase brazing of nickelJournal of Materials Science, 1993
- Transient Liquid Phase BondingAnnual Review of Materials Science, 1992
- Microstructural investigations of a nickel-based repair coating processed by liquid phase diffusion sinteringThin Solid Films, 1983
- Phase diagram of the system nickel-boronPowder Metallurgy and Metal Ceramics, 1967