Omnidirectional locomotion and traction control of the wheel-driven, wall-climbing robot,Cromsci
Authors:
- 11 April 2011
- journal article
- research article
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 29 (7) , 991-1003
Abstract
SUMMARY: Safe and cost-efficient inspection of large concrete buildings is a great challenge for mobile robots. This paper presents the locomotion system of the climbing robot,Cromsci, which uses three steerable standard wheels and negative pressure adhesion. We will introduce criteria to avoid robot slip and tilt, and methods to enhance stability. One elementary part is the close-loop-controlled adhesion system with seven individual negative pressure chambers to balance out tilt or dynamic effects caused by leaky pressure chambers. The second part is the locomotion control using a special traction control mechanism to enhance robot navigation, which will also be presented here.Keywords
This publication has 20 references indexed in Scilit:
- BEHAVIOR-BASED OBSTACLE DETECTION AND AVOIDANCE SYSTEM FOR THE OMNIDIRECTIONAL WALL-CLIMBING ROBOT CROMSCI2010
- MODELLING OF AN INNOVATIVE ACTUATOR FOR CLIMBING ROBOT ADHESION2009
- FORCE AND TRACTION CONTROLLED PROPULSION OF THE OMNIDIRECTIONAL WHEELED CLIMBING ROBOT CROMSCI2009
- DEVELOPMENT OF A WAVE PROPAGATION TYPE WALL-CLIMBING ROBOT USING A FAN AND SLIDER CRANKS2009
- Magnetic Wall Climbing Robot for Thin Surfaces with Specific Obstacles2008
- CROMSCI: development of a climbing robot with negative pressure adhesion for inspectionsIndustrial Robot: the international journal of robotics research and application, 2008
- Biologically inspired climbing with a hexapedal robotJournal of Field Robotics, 2008
- DEVELOPMENT OF A SEALING SYSTEM FOR A CLIMBING ROBOT WITH NEGATIVE PRESSURE ADHESION2007
- DEVELOPMENT OF A CLIMBING ROBOT FOR INSPECTION OF LONG WELD LINES2007
- Whole body adhesion: hierarchical, directional and distributed control of adhesive forces for a climbing robotProceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164), 2007