Induced out‐of‐plane mode at the tip of blunt lateral notches and holes under in‐plane shear loading
Authors:
- 12 January 2012
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 35 (6) , 538-555
Abstract
As it is well known the Poisson's effect in a cracked plate subjected to anti‐symmetric plane loading leads to the generation of a coupled out‐of‐plane singular mode. Recent theoretical and numerical analyses have shown that this effect is present also in plates weakened by sharp V‐notches and might play a role in failure initiation phenomena of notched plates subjected to Mode II loading, especially in the presence of a large notch opening angle.Dealing with blunt notches with a large notch radius, and not just with sharp notches, the presence or not of an out‐of‐plane mode does not appear to have been systematically investigated in the past. The main aim of this work is to confirm the existence of the stress field associated with the out‐of‐plane mode (Mode O) and to describe its main features in the presence of a notch radius significantly different from zero. The analyses include U‐notches, as well as circular and elliptic holes. The strain energy density in a 3D control volume is utilized to identify the most critical zone (with respect to failure initiation) through the plate thickness at the notch tip.Keywords
This publication has 53 references indexed in Scilit:
- Effect of the thickness on elastic deformation and quasi-brittle fracture of plate componentsEngineering Fracture Mechanics, 2010
- A review of the volume-based strain energy density approach applied to V-notches and welded structuresTheoretical and Applied Fracture Mechanics, 2009
- Fatigue‐relevant stress field parameters of welded lap joints: pointed slit tip compared with keyhole notchFatigue & Fracture of Engineering Materials & Structures, 2009
- Analysis of a new specimen for mixed mode fracture tests on brittle materialsEngineering Fracture Mechanics, 2009
- The influence of Poisson’s ratio on thickness-dependent stress concentration at elliptic holes in elastic platesInternational Journal of Fatigue, 2008
- An overview of a hybrid crack element and determination of its complete displacement fieldEngineering Fracture Mechanics, 2007
- Three-dimensional stress concentrations at elliptic holes in elastic isotropic plates subjected to tensile stressInternational Journal of Fatigue, 2007
- Finite element analysis of corner point displacements and stress intensity factors for narrow notches in square sheets and platesFatigue & Fracture of Engineering Materials & Structures, 2000
- A crack at the interface between a Kane-Mindlin plate and a rigid substrateEngineering Fracture Mechanics, 1997
- An approximate three-dimensional theory of plates with application to crack problemsInternational Journal of Engineering Science, 1970