Oxidation and Electrical Conductivity Behavior of Spinel Coatings for Metallic Interconnects of Solid Oxide Fuel Cells
Authors:
- 1 June 2007
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 63 (6) , 529-536
Abstract
Spinel coatings of Cu-Mn-O and Co-Mn-O were obtained on UNS S43000 stainless steel by oxidation of electroplated metal coatings. It was demonstrated that the coatings can effectively provide a conductive path to the metallic substrate. The area-specific resistance of both Cu-Mn and Co-Mn spinels was 0.003 Ω·cm2 after oxidation at 750°C for 1,500 h, compared to 0.189 Ω·cm2 for the uncoated UNS S43000 sample.Keywords
This publication has 18 references indexed in Scilit:
- Cobalt plating of high temperature stainless steel interconnectsJournal of Power Sources, 2006
- Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical propertiesSolid State Ionics, 2005
- Effect of slurry-coated LaSrMnO on the electrical property of Fe?Cr alloy for metallic interconnect of SOFCSolid State Ionics, 2004
- Oxidation behavior of Fe–16Cr alloy interconnect for SOFC under hydrogen potential gradientSolid State Ionics, 2004
- LaCrO3-based coatings on ferritic stainless steel for solid oxide fuel cell interconnect applicationsSurface and Coatings Technology, 2004
- Characterization of Fe–Cr Alloys for Reduced Operation Temperature SOFCsFuel Cells, 2002
- Application of Fe–16Cr ferritic alloy to interconnector for a solid oxide fuel cellSolid State Ionics, 2001
- Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacksJournal of Materials Science, 1996
- Diffusion of18O in massive Cr2O3 and in Cr2O3 scales at 900 C and its relation to the oxidation kinetics of chromia forming alloysOxidation of Metals, 1995
- Electronic transport in thermally grown Cr2O3Oxidation of Metals, 1990