High-power, null-type, inverted pendulum thrust stand
- 1 May 2009
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 80 (5) , 055103
Abstract
This article presents the theory and operation of a null-type, inverted pendulum thrust stand. The thrust stand design supports thrusters having a total mass up to 250 kg and measures thrust over a range of 1 mN to 5 N. The design uses a conventional inverted pendulum to increase sensitivity, coupled with a null-type feature to eliminate thrust alignment error due to deflection of thrust. The thrust stand position serves as the input to the null-circuit feedback control system and the output is the current to an electromagnetic actuator. Mechanical oscillations are actively damped with an electromagnetic damper. A closed-loop inclination system levels the stand while an active cooling system minimizes thermal effects. The thrust stand incorporates an in situ calibration rig. The thrust of a 3.4 kW Hall thruster is measured for thrust levels up to 230 mN. The uncertainty of the thrust measurements in this experiment is ±0.6%, determined by examination of the hysteresis, drift of the zero offset and calibration slope variation.Keywords
This publication has 5 references indexed in Scilit:
- Deep Space 1 Flight Spare Ion Thruster 30,000-Hour Life TestJournal of Propulsion and Power, 2009
- Thrust stand for electric propulsion performance evaluationReview of Scientific Instruments, 2006
- SMART-1 mission description and development statusPlanetary and Space Science, 2002
- Thrust stand for pulsed plasma thrustersReview of Scientific Instruments, 1997
- Thrust stand for high-power electric propulsion devicesReview of Scientific Instruments, 1991