P1K-3 Contactless Torque and Temperature Sensor Based on SAW Resonators
Authors:
- V. KalininVKV. Kalinin
- G. BownGBG. Bown
- A. LeighALA. Leigh
- 1 January 2006
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10510117,p. 1490-1493
Abstract
A wireless passive SAW sensor based on three one-port resonators and capable of simultaneous torque and temperature measurement is presented. The sensing element is made on Y+34deg cut quartz substrate and the resonant frequencies are in the range from 433 to 437 MHz. Interrogation of the sensor is performed through an RF rotary coupler by short RF pulses. A microprocessor in the interrogation unit analyses the spectrum of SAW responses and calculates a temperature compensated torque value. Experimental results show that the temperature measurement error is within plusmn1deg at any angle of the shaft and the torque measurement error does not exceed plusmn1% of full scale within the range from -40deg to +125degCKeywords
This publication has 7 references indexed in Scilit:
- A Second Generation In-Car Tire Pressure Monitoring System Based on Wireless Passive SAW Sensors2006
- Pulsed interrogation of the SAW torque sensor for electrical power assisted steering2005
- Non-contact torque sensors based on SAW resonators2003
- Radio accessible SAW sensors for non-contact measurement of torque and temperature2002
- Universal pressure and temperature SAW sensor for wireless applications2002
- Theory and application of passive SAW radio transponders as sensorsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Measurement of mechanical quantities using quartz sensors1996