Effect of Al2O3 Dot Patterning on CZTSSe Solar Cell Characteristics
Open Access
- 18 September 2020
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 10 (9) , 1874
Abstract
In this study, a 5-nm thick Al2O3 layer was patterned onto the Mo electrode in the form of a dot to produce a local rear contact, which looked at the effects of this contact structure on Cu2ZnSn(S1-xSex)4 (CZTSSe) growth and solar cell devices. Mo was partially exposed through open holes having a square dot shape, and the closed-ratios of Al2O3 passivated areas were 56%, 75%, and 84%. The process of synthesizing CZTSSe is the same as that of the previous process showing 12.62% efficiency. When the 5-nm-Al2O3 dot patterning was applied to the Mo surface, we observed that the MoSSe formation was well suppressed under the area coated of 5-nm-Al2O3 film. The self-alignment phenomenon was observed in the back-contact area. CZTSSe was easily formed in the Mo-exposed area, while voids were formed near the Al2O3-coated area. The efficiency of the CZTSSe solar cell decreased when the Al2O3 passivated area increased. The exposure area and pitch of Mo, the collecting path of the hole, and the supplying path of Na seemed to be related to efficiency. Thus, it was suggested that the optimization of the Mo-exposed pattern and the additional Na supply are necessary to develop the optimum self-aligned CZTSSe light absorber.Keywords
Funding Information
- Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE), Republic of Korea (20173010012980)
- the Technology Development Program to Solve Climate Change of the National Research Foundation (NRF) funded by the Ministry of Science and ICT, Republic of Korea (2016M1A2A2936781)
This publication has 48 references indexed in Scilit:
- Improved Rear Surface Passivation of Cu(In,Ga)Se$_{\bf 2}$ Solar Cells: A Combination of an Al$_{\bf 2}$O $_{\bf 3}$ Rear Surface Passivation Layer and Nanosized Local Rear Point ContactsIEEE Journal of Photovoltaics, 2014
- Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% EfficiencyAdvanced Energy Materials, 2013
- Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contactsSolar Energy Materials and Solar Cells, 2013
- Band tailing and efficiency limitation in kesterite solar cellsApplied Physics Letters, 2013
- Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4Advanced Energy Materials, 2012
- Investigating the Role of Grain Boundaries in CZTS and CZTSSe Thin Film Solar Cells with Scanning Probe MicroscopyAdvanced Materials, 2012
- Effect of sodium diffusion on the structural and electrical properties of Cu2ZnSnS4 thin filmsSolar Energy Materials and Solar Cells, 2011
- Compositional dependence of structural and electronic properties of CuZnSn(S,Se)alloys for thin film solar cellsPhysical Review B, 2011
- The Consequences of Kesterite Equilibria for Efficient Solar CellsJournal of the American Chemical Society, 2011
- Electrical and optical properties of CuZnSnS thin films prepared by rf magnetron sputtering processSolar Energy Materials and Solar Cells, 2003