Characterization of Mechanical Properties of MgB2 conductor for Superconducting Link Project at CERN
Authors:
- Michinaka SuganoMSMichinaka Sugano
- Amalia BallarinoABAmalia Ballarino
- Barbora BartovaBBBarbora Bartova
- Roger BjoerstadRBRoger Bjoerstad
- Christian ScheuerleinCSChristian Scheuerlein
- Gianni GrassoGGGianni Grasso
- 31 October 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 25 (3) , 1
Abstract
In the framework of high luminosity upgrade of Large Hadron Collider at CERN, superconducting links are being developed. MgB 2 wire is a candidate conductor for use in high-current cables. Mechanical properties of this material are of key importance for the definition of the cable design and operating conditions. In this study, we evaluated the Young's modulus of MgB 2 filaments extracted from ex situ processed composite wires. The wires were produced in unit lengths of about 1 km and used in high-current cables. Single fiber tensile test was carried out on filaments composed of MgB 2 , Nb barrier, and Nb-Ni reaction layer. From the unloading modulus of filament specimens measured with different gauge lengths, the Young's modulus of composite filaments extracted from two different strands was determined to be 114 and 122 GPa at room temperature, respectively. By using the rule-of-mixture, the Young's modulus of MgB 2 was estimated to be lower than that reported for highly dense MgB 2 bulks. The reason for such difference is discussed from the viewpoint of void fraction.Keywords
This publication has 9 references indexed in Scilit:
- Elasticity mapping of delta precipitate in alloy 625 using atomic force acoustic microscopy with a new approach to eliminate the influence of tip conditionPhilosophical Magazine Letters, 2014
- Development of superconducting links for the Large Hadron Collider machineSuperconductor Science and Technology, 2014
- Strongly connectedex situMgB2polycrystalline bulks fabricated by solid-state self-sinteringSuperconductor Science and Technology, 2012
- Microscopic role of carbon on MgB2 wire for critical current density comparable to NbTiNPG Asia Materials, 2012
- Nanoindentation Testing2011
- Acoustic wave propagation in Ni3 R (R = Mo, Nb, Ta) compoundsPramana, 2011
- Stress–strain effects on powder-in-tube MgB2tapes and wiresSuperconductor Science and Technology, 2005
- Elastic properties of hot-isostatically-pressed magnesium diborideApplied Physics Letters, 2003
- Structure Observed by Neutron Diffraction, Mechanical Behavior and Critical Current of Multifilamentary Nb-Ti/Cu Superconducting Composite WireJournal of the Japan Institute of Metals and Materials, 1997