Effects of Ti Addition on Microstructure, Mechanical Properties and Corrosion Resistance of the Cu-Zn-Ni Alloy
Open Access
Abstract
The effects of Ti addition on the microstructure, mechanical properties and corrosion resistance of the Cu-30Zn-6Ni-1.5Ti (wt.%) alloy were investigated in the present study. Microstructure analysis confirms that the Ni3Ti and NiTi phases are formed in the Cu-Zn-Ni-Ti alloy. Most of the Ni3Ti particles dissolve into the matrix, whereas NiTi particles remained after the solution treatment. Moreover, nano-sized Ni3Ti and Cu2NiZn phases are precipitated from the matrix during the aging process. The yield strength improvement of the studied alloy is attributed to the Orowan strengthening (accounting for 42.5% of the total yield strength), then the grain boundary strengthening (31.1%), the dislocation strengthening (16.9%), the twin boundary strengthening (5.0%) and the solid solution strengthening (0.5%). After cold rolling with 90% deformation and aging at 440 °C for 1 h, the designed alloy has a hardness of 327.1 HV, a yield strength of 1192 MPa, an ultimate tensile strength of 1297 MPa, an elongation of 1.8%, an electrical conductivity of 11.2% IACS and a corrosion rate of 2.8 μm/month in 3.5% NaCl solution.Keywords
Funding Information
- National Natural Science Foundation of China (52374271, SYLUGXRC+12, RC220104, LJKMZ20220588, LMKK20240101)
- Research Fund Project of Liaoning Provincial Education Department (52374271, SYLUGXRC+12, RC220104, LJKMZ20220588, LMKK20240101)
- Support Program for Young and Middle-aged Talents in Science and Technology Innovation in Shenyang (52374271, SYLUGXRC+12, RC220104, LJKMZ20220588, LMKK20240101)
- General Program of Liaoning Provincial Department of Education (52374271, SYLUGXRC+12, RC220104, LJKMZ20220588, LMKK20240101)
- Liaoning Provincial Engineering Research Center for High-Value Utilization of Magnesite (52374271, SYLUGXRC+12, RC220104, LJKMZ20220588, LMKK20240101)
This publication has 33 references indexed in Scilit:
- Corrosion mechanism and corrosion behavior prediction of Cu-10Ni-X alloys in NaCl solution combining DFT calculation and experimentsCorrosion Science, 2023
- Achieving high strength and high electrical conductivity in Cu-Cr-Zr alloy by modifying shear banding during rollingJournal of Alloys and Compounds, 2023
- Microstructure and mechanical properties of a CuNiTi alloy with a large product of strength and elongationJournal of Materials Research and Technology, 2020
- A Novel Cu-10Zn-1.5Ni-0.34Si Alloy with Excellent Mechanical Property Through Precipitation HardeningJournal of Materials Engineering and Performance, 2016
- A precipitation-hardened high-entropy alloy with outstanding tensile propertiesActa Materialia, 2016
- Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sinteringActa Materialia, 2013
- Effect of aluminum on precipitation hardening in Cu–Ni–Zn alloysJournal of Materials Science, 2010
- Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloysActa Materialia, 2008
- Strengthening mechanisms of MgSi alloysActa Materialia, 1996
- The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700°CActa Metallurgica, 1972