A six-beam method to measure turbulence statistics using ground-based wind lidars
Authors:
Preprint
- 10 October 2014
- preprint
- Published by Copernicus GmbH in EGUsphere
Abstract
A so-called six-beam method is proposed to measure atmospheric turbulence using a ground-based wind lidar. This method requires measurement of the radial velocity variances at five equally spaced azimuth angles on the base of a scanning cone and one measurement at the center of the scanning circle, i.e.using a vertical beam at the same height. The scanning configuration is optimized to minimize the sum of the random errors in the measurement of the second-order moments of the components (u,v, w) of the wind field. We present this method as an alternative to the so-called velocity azimuth display (VAD) method that is routinely used in commercial wind lidars, and which usually results in significant averaging effects of measured turbulence. In the VAD method, the high frequency radial velocity measurements are used instead of their variances. The measurements are performed using a pulsed lidar (WindScanner), and the derived turbulence statistics (using both methods) such as the u and v variances are compared with those obtained from a reference cup anemometer and a wind vane at 89 m height under different atmospheric stabilities. The measurements show that in comparison to the reference cup anemometer, depending on the atmospheric stability and the wind field component, the six-beam method measures between 85–101% of the reference turbulence, whereas the VAD method measures between 66–87% of the reference turbulence.Keywords
All Related Versions
- Published version: Atmospheric Measurement Techniques, 8 (2), 729.
Funding Information
- Danish Agency for Higher Education and Science (0602-02486B)
This publication has 29 references indexed in Scilit:
- Accounting for the speed shear in wind turbine power performance measurementWind Energy, 2011
- Lidar Scanning of Momentum Flux in and above the Atmospheric Surface LayerJournal of Atmospheric and Oceanic Technology, 2010
- Spatial averaging-effects on turbulence measured by a continuous-wave coherent lidarMeteorologische Zeitschrift, 2009
- Comparison of 3D turbulence measurements using three staring wind lidars and a sonic anemometerMeteorologische Zeitschrift, 2009
- Measurements of Boundary Layer Profiles with In Situ Sensors and Doppler LidarJournal of Atmospheric and Oceanic Technology, 2008
- An eight month test campaign of the Qinetiq ZephIR system: Preliminary resultsMeteorologische Zeitschrift, 2007
- Measurements of Boundary Layer Profiles in an Urban EnvironmentJournal of Applied Meteorology and Climatology, 2006
- Estimating Spatial Velocity Statistics with Coherent Doppler LidarJournal of Atmospheric and Oceanic Technology, 2002
- Coherent Doppler lidar signal covariance including wind shear and wind turbulenceApplied Optics, 1994
- Note on the Observation of Small‐Scale Atmospheric Turbulence by Doppler Radar TechniquesRadio Science, 1969