CLOSURE BEHAVIOUR OF SURFACE CRACKS
Authors:
- 1 January 1983
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 6 (3) , 225-239
Abstract
Abstract— The fatigue crack closure response was investigated for a surface crack in BS4360 50B structural steel, subjected to (1) constant amplitude loading and (2) constant amplitude loading interrupted by a single peak overload. A variety of compliance techniques was employed to determine closure behaviour. The crack mouth gauge measured the bulk, plane strain closure load, while the near tip strain gauge indicated the surface, plane stress closure response. For constant amplitude loading it was found that the surface regions of a surface crack are closed for a greater portion of the load cycle than the maximum depth point. A single peak overload caused different closure and growth rate transients at the surface of the thumbnail crack and at the maximum depth point. For growth rates above 10‐6 mm/cycle, such behaviour agrees with the response of a through crack when subjected to constant amplitude loading, and a single peak overload.Keywords
This publication has 14 references indexed in Scilit:
- Measuring fatigue cracks in fillet welded jointsInternational Journal of Fatigue, 1982
- A CRITICAL REVIEW OF CRACK TIP STRESS INTENSITY FACTORS FOR SEMI‐ELLIPTIC CRACKS*Fatigue & Fracture of Engineering Materials & Structures, 1981
- An empirical stress-intensity factor equation for the surface crackEngineering Fracture Mechanics, 1981
- Delayed retardation phenomenon of fatigue crack growth resulting from a single application of overloadEngineering Fracture Mechanics, 1978
- The effect of single overloads on fatigue-crack propagation in steelsMetal Science, 1977
- Load Interaction Effects on Fatigue Crack Growth in A514F Steel Alloy1977
- A comparison of acoustic and strain gauge techniques for crack closureInternational Journal of Fracture, 1975
- Crack tip closure and environmental crack propagationEngineering Fracture Mechanics, 1975
- Plasticity effects in crack propagationEngineering Fracture Mechanics, 1973
- The Significance of Fatigue Crack Closure1971