Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes
Authors:
- Lin ChenLCLin Chen
- Giovanni RamierezGRGiovanni Ramierez
- Hans-Georg SteinrückHans-Georg Steinrück
- Brandon L. FisherBFBrandon L. Fisher
- Michael F. ToneyMTMichael F. Toney
- Mark C. HersamMHMark C. Hersam
- Jeffrey W. ElamJEJeffrey W. Elam
- 9 July 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (32) , 26972-26981
Abstract
Lithium metal anodes can largely enhance the energy density of rechargeable batteries due to the high theoretical capacity and the high negative potential. However, the problem of lithium dendrite formation and low Coulombic efficiency (CE) during electrochemical cycling must be solved before lithium anodes can be widely deployed. Herein, a new atomic layer deposition (ALD) chemistry to realize the low-temperature synthesis of homogenous and stoichiometric lithium fluoride (LiF) is reported, which then for the first time, as far as we know, is deposited directly on lithium metal. The LiF preparation is performed at 150°C yielding 0.8 Å/cycle. The LiF films are found to be crystalline, highly conformal, and stoichiometric with purity levels >99%. Nanoindentation measurements demonstrate the LiF achieving a shear modulus of 58 GPa, seven times higher than the sufficient value to resist lithium dendrites. When used as the protective coating on lithium, it enables a stable Coulombic efficiency as high as 99.5% for over 170 cycles, about 4 times longer than that of bare lithium anodes. The remarkable battery performance is attributed to the nanosized LiF that serves two critical functions simultaneously: 1) high dielectric value to create a uniform current distribution for excellent lithium stripping/plating and ultrahigh mechanical strength to suppress lithium dendrites; 2) superior stability and electrolyte isolation by the pure LiF on lithium prevents parasitic reactions for much improved CE. This new ALD chemistry for conformal LiF not only offers a promising avenue to implement lithium metal anodes for high capacity batteries, but paves the way for future studies to investigate failure and evolution mechanisms of solid electrolyte interphase (SEI) using our LiF on anodes such as graphite, silicon and lithium.Keywords
Funding Information
- Basic Energy Sciences
- U.S. Department of War
- Division of Materials Research (1620901)
This publication has 58 references indexed in Scilit:
- A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteriesNature Communications, 2013
- Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur BatteriesAdvanced Functional Materials, 2012
- Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteriesNanoscale, 2012
- ALD for clean energy conversion, utilization, and storageMRS Bulletin, 2011
- The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer InterfacesJournal of the Electrochemical Society, 2005
- Dendrite Growth in Lithium/Polymer SystemsJournal of the Electrochemical Society, 2003
- Composition, depth profiles and lateral distribution of materials in the SEI built on HOPG-TOF SIMS and XPS studiesJournal of Power Sources, 2001
- Defect Chemistry: Composition, Transport, and Reactions in the Solid State; Part I: ThermodynamicsAngewandte Chemie International Edition, 1993
- Unit-cell dimensions of lithium fluoride made from Li6and Li7Acta Crystallographica, 1955
- Mechanical and Thermal Properties of Certain Optical Crystalline Materials*Journal of the Optical Society of America, 1951