Facile synthesis of CNT interconnected PVP-ZIF-8 derived hierarchically porous Zn/N co-doped carbon frameworks for oxygen reduction
- 26 February 2021
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 13 (12) , 6248-6258
Abstract
In this work, a strategy has been adopted to construct an architecture through the coordination of polyvinylpyrrolidone (PVP) and a monodisperse zeolitic imidazolate framework (ZIF-8), which was entwined by carbon nanotubes (CNTs) firstly, followed by a pyrolysis process to obtain the hybrid catalyst. The meticulous design of the hybrid material using CNTs to interconnect the PVP assisted ZIF-8 derived porous carbon frameworks together produces a hierarchical pore structure and dual-heteroatom (Zn/N) doping (Zn–N/PC@CNT). Without further acid treatment, the hybrid material prepared after pyrolysis at 900 °C (PVP-ZIF-8@CNT-900) has been demonstrated as an efficient non-precious metal catalyst for the oxygen reduction reaction (ORR) with its superior stability compared to the commercial 20 wt% Pt/C catalyst in alkaline media. The catalyst shows better performance towards the ORR, with its more positive onset and half-wave potentials (Eonset = 0.960 V vs. RHE and E1/2 = 0.795 V vs. RHE) than the counterpart system which is free of both CNT and PVP. The high performance of the hybrid catalyst can be ascribed to the co-existence of dual-active sites with hierarchical pore structures originating from the synergistic effects between Zn/N co-doped porous carbon and CNTs. We further demonstrated the single-cell performance by using the homemade system as the cathode catalyst for the Alkaline Exchange Membrane Fuel Cell (AEMFC) system, which showed a maximum power density of 45 mW cm−2 compared to 60 mW cm−2 obtained from the 40 wt% Pt/C catalyst.Keywords
Funding Information
- Anusandhan National Research Foundation (GAP328726, CRG/2019/000277)
This publication has 52 references indexed in Scilit:
- One-pot synthesis of highly ordered nitrogen-containing mesoporous carbon with resorcinol–urea–formaldehyde resin for CO2 captureCarbon, 2014
- A Facile and General Approach for the Direct Fabrication of 3D, Vertically Aligned Carbon Nanotube Array/Transition Metal Oxide Composites as Non‐Pt Catalysts for Oxygen Reduction ReactionsAdvanced Materials, 2014
- Highly efficient metal-free phosphorus-doped platelet ordered mesoporous carbon for electrocatalytic oxygen reductionCarbon, 2014
- Shape Control of Mn3O4 Nanoparticles on Nitrogen‐Doped Graphene for Enhanced Oxygen Reduction ActivityAdvanced Functional Materials, 2013
- ZIF-derived in situ nitrogen-doped porous carbons as efficient metal-free electrocatalysts for oxygen reduction reactionEnergy & Environmental Science, 2013
- Synthesis of Phosphorus‐Doped Graphene and its Multifunctional Applications for Oxygen Reduction Reaction and Lithium Ion BatteriesAdvanced Materials, 2013
- Facile Synthesis of High-Crystallinity Graphitic Carbon/Fe3C Nanocomposites As Counter Electrodes for High-Efficiency Dye-Sensitized Solar CellsACS Applied Materials & Interfaces, 2013
- B, N- and P, N-doped graphene as highly active catalysts for oxygen reduction reactions in acidic mediaJournal of Materials Chemistry A, 2013
- Study on the oxygen adsorption property of nitrogen-containing metal-free carbon-based cathode catalysts for oxygen reduction reactionElectrochimica Acta, 2012
- Electrical and structural properties of p-type ZnO:N thin films prepared by plasma enhanced chemical vapour depositionSemiconductor Science and Technology, 2005